Windmill Cables
EPR/HFXLEVA LSOH 0.6/1kV Torsion Resistant Power Cable HFEPR/HFEVA 0.6/1kV LSOH Screened Torsion Resistant Power Cable Al Conductor EPR/XLEVA 0.6/1kV LSOH Power Cable 90℃ more

  Windmill Cables

(H)07RN-F HFFR & UL/CSA 600V 90°C

 

Application

These cables are designed for use at medium mechanical stresses in wind turbines. They can be used in case of

protected and fixed installation in tubes or in equipment as well as rotor connecting cable of motors with a

working voltage up to 1000 V alternating voltage or a direct voltage up to 750 V against ground.

Standards

HD 22.4

UL 758

Construction

Windmill Cables

Conductor: Stranded bare copper, fine wire class 5 according to DIN VDE 0295.

Insulation: EPR class 28.

Sheath: EVA.

Technical Data

Rated Voltage Uo/U (Um) 600V(UL/CSA)
Operating Temperatures -40℃~+90℃
Minimum Bending Radius flexing: 6×OD; fixed: 4×OD
Short-circuit Temperature 250℃
Flame Retardant EN 50265-2-1/IEC 60332-1
Corrosive Gases EN 50267-2
Smoke Density EN 50268-2
Oil Resistant Yes
UV Resistant Yes

Dimensions and Weight

Construction Nominal Overall Diameter Nominal Weight
No. of cores×mm² mm kg/km
1G25 13.9 420
1×50 17.8 790
1G95 22.4 1145
1×150 27.1 1845
1×240 32.1 2820
1×300 35.0 3390
3G1.5 9.8 165
3G2.5 11.5 227
3×25 27.5 1435
3×50 35.5 2598
3×70 41.0 3570
3×95 46.0 4510
3×240 70.5 10280
4G1.5 10.5 208
4G2.5 12.5 289
4G4 14.5 394
5G1.5 11.5 258
5G2.5 13.5 362
7G1.5 13.5 412
7G2.5 15.5 554

G: with green-yellow earth core
×: without green-yellow earth core