BS 5308 Cables | |||
BS 5308 Cables
BS5308 Cable Part 2 Type2 PVC-OS-SWA-PVC
Application
BS5308 Cable Part 2 Type2 PVC-OS-SWA-PVC are generally used when the risk of mechanical damage is
increased. The galvanised steel wire armour provides excellent protection. Generally used within industrial
process anufacturing plants for communication, data and voice transmission signals and services, Also used for
the interconnection of electrical equipment and instruments, typically in chemical or petrolchemical industry. The
armored versions are generally use for outdoor installation for direct burial or installed in the duct and suitable
for wet and damp reas.
Construction
Conductor :Annealed copper, sizes: 0.5mm² and 0.75mm² mulitistranded(Class 5), 1.5mm² multistranded(Class
2) to BS6360
Insulation :PVC (polyvinyl chloride), type TI1 to BS 6746
Pairing :Two insulated conductors uniformly twisted together with a lay not exceeding 100mm
Colour code:Multicore cables: up to 40 cores yellow with black numbers, 41 -80 cores black with yellow numbers.
Multipair cables:See technical information
Binder tape:PETP transparent tape
Collective screen :Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with
tinned copper drain wire, 0.5mm²
Inner Sheath:PVC (polyvinyl chloride), type TM 1 to BS 6746
Amour :Galvanized steel wire armour
Outer sheath:PVC Sheath, type TM 1 or type 6 to BS 6746
Sheath colour:Black or blue
Mechanical and Electrical Properties
Operating temperature: -40˚C up to + 70˚C( fixed installation)
0˚C to +50˚C(during operation )
Minimum bending radius:
6 x overall diameter
Conductor Area Size | mm2 | 0.5 | 0.75 | 1.5 | |
---|---|---|---|---|---|
Conductor Stranding | No. x mm | 16 x 0.2 | 24 x 0.2 | 7 x 0.53 | |
Conductor resistance max | ohm/km | 39.7 | 26.5 | 12.3 | |
Insulation resistance min | Mohm/km | 25 | 25 | 25 | |
Max. Mutual Capacitance:pair or adjacent cores | pF/m | 250 | 250 | 250 | |
Capacitance between any core or screen max. | pF/m | 400 | 400 | 400 | |
Max. L/R Ratio for adjacentcores(Inductance/Resistance) | μH/ohm | 25 | 25 | 40 | |
Test voltage | Core to core | V | 1000 | 1000 | 1000 |
Core to screen | V | 1000 | 1000 | 1000 | |
Rated voltage max | V | 300/500 | 300/500 | 300/500 |
Parameter
Multicore
No.of Cores | No.and Dia. of Wires | Nominal Conductor Cross-Sectional Area | Nominal Thickness of Insulation | Nominal Thickness of bedding | Nominal Dia. over Bedding | Nominal Thickness of Armour | Nominal Thickness of Sheath | Nominal Dia. of Cable | Approx.Weight |
---|---|---|---|---|---|---|---|---|---|
no./mm | mm2 | mm | mm | mm | mm | mm | mm | kg/km | |
2 | 24/0.2 | 0.75 | 0.6 | 0.8 | 7.2 | 0.9 | 1.3 | 11.2 | 280 |
3 | 24/0.2 | 0.75 | 0.6 | 0.8 | 7.2 | 0.9 | 1.3 | 11.6 | 305 |
4 | 24/0.2 | 0.75 | 0.6 | 0.8 | 7.8 | 0.9 | 1.3 | 12.4 | 335 |
6 | 24/0.2 | 0.75 | 0.6 | 0.9 | 9.4 | 0.9 | 1.4 | 14 | 400 |
10 | 24/0.2 | 0.75 | 0.6 | 1.1 | 12.2 | 0.9 | 1.5 | 17 | 565 |
20 | 24/0.2 | 0.75 | 0.6 | 1.2 | 15.6 | 1.25 | 1.6 | 21.3 | 950 |
40 | 24/0.2 | 0.75 | 0.6 | 1.3 | 20.6 | 1.6 | 1.7 | 27.4 | 1590 |
80 | 24/0.2 | 0.75 | 0.6 | 1.5 | 28.5 | 1.6 | 1.9 | 35.7 | 2450 |
2 | 7/0.53 | 1.5 | 0.6 | 0.8 | 8 | 0.9 | 1.4 | 12.6 | 330 |
3 | 7/0.53 | 1.5 | 0.6 | 0.9 | 8.2 | 0.9 | 1.4 | 12.8 | 380 |
4 | 7/0.53 | 1.5 | 0.6 | 0.9 | 9 | 0.9 | 1.4 | 13.6 | 420 |
6 | 7/0.53 | 1.5 | 0.6 | 1.1 | 11 | 0.9 | 1.4 | 15.6 | 540 |
10 | 7/0.53 | 1.5 | 0.6 | 1.2 | 14 | 1.25 | 1.6 | 19.7 | 750 |
20 | 7/0.53 | 1.5 | 0.6 | 1.3 | 17.9 | 1.6 | 1.7 | 24.5 | 1260 |
40 | 7/0.53 | 1.5 | 0.6 | 1.5 | 24 | 1.6 | 1.9 | 31 | 2140 |
80 | 7/0.53 | 1.5 | 0.6 | 1.7 | 32.9 | 2 | 2.1 | 41.1 | 3300 |
Multipair
No.of pairs | No.and Dia. of Wires | Nominal Conductor Cross-Sectional Area | Nominal Thickness of Insulation | Nominal Thickness of bedding | Nominal Dia. over Bedding | Nominal Thickness of Armour | Nominal Thickness of Sheath | Nominal Dia. of Cable | Approx.Weight |
---|---|---|---|---|---|---|---|---|---|
no./mm | mm2 | mm | mm | mm | mm | mm | mm | kg/km | |
1 | 16/0.2 | 0.5 | 0.6 | 0.8 | 6.2 | 0.9 | 1.3 | 10.6 | 260 |
2 | 16/0.2 | 0.5 | 0.6 | 0.8 | 7.1 | 0.9 | 1.3 | 11.5 | 305 |
5 | 16/0.2 | 0.5 | 0.6 | 1.1 | 12.4 | 0.9 | 1.5 | 17.2 | 610 |
10 | 16/0.2 | 0.5 | 0.6 | 1.2 | 16.5 | 1.25 | 1.6 | 22.2 | 1060 |
15 | 16/0.2 | 0.5 | 0.6 | 1.3 | 19.2 | 1.6 | 1.7 | 25.8 | 1330 |
20 | 16/0.2 | 0.5 | 0.6 | 1.3 | 21.7 | 1.6 | 1.8 | 28.5 | 1800 |
30 | 16/0.2 | 0.5 | 0.6 | 1.5 | 26.4 | 1.6 | 1.9 | 33.4 | 1980 |
50 | 16/0.2 | 0.5 | 0.6 | 1.7 | 33.4 | 2 | 2.1 | 41.6 | 3070 |
1 | 24/0.2 | 0.75 | 0.6 | 0.8 | 6.7 | 0.9 | 1.3 | 11.1 | 305 |
2 | 24/0.2 | 0.75 | 0.6 | 0.8 | 7.7 | 0.9 | 1.4 | 12.3 | 360 |
5 | 24/0.2 | 0.75 | 0.6 | 1.2 | 13.8 | 1.25 | 1.5 | 19.3 | 820 |
10 | 24/0.2 | 0.75 | 0.6 | 1.3 | 18.4 | 1.6 | 1.7 | 25 | 1250 |
15 | 24/0.2 | 0.75 | 0.6 | 1.3 | 21.1 | 1.6 | 1.8 | 27.9 | 1600 |
20 | 24/0.2 | 0.75 | 0.6 | 1.5 | 24.4 | 1.6 | 1.8 | 31.2 | 1800 |
30 | 24/0.2 | 0.75 | 0.6 | 1.7 | 29.6 | 2 | 2 | 37.6 | 2570 |
50 | 24/0.2 | 0.75 | 0.6 | 2 | 37.4 | 2.5 | 2.3 | 47.3 | 3800 |
1 | 7/0.53 | 1.5 | 0.6 | 0.8 | 7.5 | 0.9 | 1.4 | 12.1 | 360 |
2 | 7/0.53 | 1.5 | 0.6 | 0.9 | 8.8 | 0.9 | 1.4 | 13.4 | 460 |
5 | 7/0.53 | 1.5 | 0.6 | 1.2 | 15.6 | 1.25 | 1.6 | 21.3 | 1040 |
10 | 7/0.53 | 1.5 | 0.6 | 1.3 | 20.9 | 1.6 | 1.8 | 27.7 | 1610 |
15 | 7/0.53 | 1.5 | 0.6 | 1.5 | 24.6 | 1.6 | 1.9 | 31.6 | 2060 |
20 | 7/0.53 | 1.5 | 0.6 | 1.5 | 27.8 | 1.6 | 2 | 35 | 2630 |
30 | 7/0.53 | 1.5 | 0.6 | 1.7 | 33.7 | 2 | 2.1 | 41.9 | 3460 |
50 | 7/0.53 | 1.5 | 0.6 | 2 | 43 | 2.5 | 2.4 | 52.8 | 5520 |