IEC 60502-1 Cables|BS 5467|BS 6346/5467|armoured|600/1000V, XLPE Insulated Cables according to IEC 60502-1(unarmoured|CE-mark

600/1000V, XLPE Insulated Cables according to IEC 60502-1(armoured)

IEC 60502-1 cables are used for electricity supply in low voltage installation system, IEC 60502-1 cables are

suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations,

local energy distributions, industrial plants, where there is no risk of mechanical damage.

Conductors:

Copper or Aluminium conductor, round standed or Shaped, Class 2 to IEC 60228, BS EN 60228. For smaller

sizes, a solid round conductor, Class 1 as per IEC 60228, BS EN 60228 can also be supplied upon request.

Insulation:

XLPE material and thickness shall be as per IEC 60502 or BS 5467 rated for 90°C continuous operation.

Colour Code (1) :
1 Core :		Red or Black
2 Cores	:	Red, Black
3 Cores	:	Red, Yellow, Blue
4 Cores	:	Red, Yellow, Blue, Black
5 Cores	:	Red, Yellow, Blue, Black, Green
Above 5 Cores :		Black Cores with White numerals
Colour Code (2) :
1 Core :		Brown or Blue
2 Cores	:	Brown or Blue
3 Cores	:	Brown, Black, Grey
4 Cores	:	Blue, Brown, Black, Grey
5 Cores	:	Green/Yellow, Blue, Brown, Black, Grey
Above 5 Cores :		Black Cores with White numerals

Assembly / Two, Three or Four insulated conductors are laid-up together with non-hygroscopic fillers

Inner Sheath and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this

layer may be omitted Armour Aluminum/Galvanized Steel Wires applied helically over the bedding as per IEC

60502 or as per BS 5467, BS 6346. Single core cables shall be Aluminium wire armour. Aluminum/Steel Tapes

applied helically over the bedding of multi-core cables as per IEC 60502.

Outer Sheath Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.

Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight

resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as

LLDPE, MDPE, HDPE, LSF, CPE are available on request.

Fire Cables can be supplied with special flame retardant PVC outer sheath to comply with Performance the flame

test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, of Cable can also supply cables with

Low Smoke Halogen Free (LSHF) material according to IEC Sheaths 60502-1, BS 7211, BS 6724 or other

equivalent standards.

Single core( aluminum wire armoured)

IEC 60502-1 Cables

Nominal Cross Section	Diameter of Conductor (Approx.)	Nominal Insulation thickness	Nominal Inner Covering thickness	Nominal Alum Wire dia.	Nominal Sheath thickness	Overall Diameter (Approx.)
mm²	mm	mm	mm	mm	mm	mm
1x4	2.3	0.7	1	0.8	1.8	10.9
1x6	2.8	0.7	1	0.8	1.8	11.4
1x10	3.6	0.7	1	0.8	1.8	12.2
1x16	4.5	0.7	1	0.8	1.8	13.1
1x25	5.6	0.9	1	0.8	1.8	14.6
1x35	6.7	0.9	1	1.25	1.8	16.6
1x50	8	1	1	1.25	1.8	18.1
1x70	9.4	1.1	1	1.25	1.8	19.7
1x95	11	1.1	1	1.6	1.8	22
1x120	12.4	1.2	1	1.6	1.8	23.6
1x150	13.8	1.4	1	1.6	1.8	25.4
1x185	15.3	1.6	1	1.6	1.8	27.4
1x240	17.5	1.7	1	1.6	1.9	29.9
1x300	19.5	1.8	1	2	2	33.1
1x400	22.6	2	1.2	2	2.2	37.3
1x500	25.2	2.2	1.2	2	2.3	40.5

Two cores(Galvanized steel wire armoured)

IEC 60502-1 Cables

Nominal Cross Section	Diameter of Conductor (Approx.)	Nominal Insulation thickness	Nominal Inner Covering thickness	Nominal Steel Wire dia.	Nominal Sheath thickness	Overall Diameter (Approx.)
mm²	mm	mm	mm	mm	mm	mm
2x1.5	1.4	0.7	1	0.8	1.8	12.8
2x2.5	1.8	0.7	1	0.8	1.8	13.6
2x4	2.3	0.7	1	0.8	1.8	14.6
2x6	2.8	0.7	1	1.25	1.8	16.5
2x10	3.6	0.7	1	1.25	1.8	18.1
2x16	4.5	0.7	1	1.25	1.8	19.9
2x25	5.6	0.9	1	1.6	1.8	23.6
2x35	6.7	0.9	1	1.6	1.8	25.8
2x50	8	1	1	1.6	1.9	29
2x70	9.4	1.1	1	2	2	33.2
2x95	11	1.1	1.2	2	2.1	37.1
2x120	12.4	1.2	1.2	2	2.3	40.5
2x150	13.8	1.4	1.2	2.5	2.4	45.4
2x185	15.3	1.6	1.4	2.5	2.6	49.9
2x240	17.5	1.7	1.4	2.5	2.7	55.1
2x300	19.5	1.8	1.6	2.5	2.9	60.2
2x400	22.6	2	1.6	2.5	3.1	67.7

Three cores(Galvanized steel wire armoured)

IEC 60502-1 Cables

Nominal Cross Section	Diameter of Conductor (Approx.)	Nominal Insulation thickness	Nominal Inner Covering thickness	Nominal Steel Wire dia.	Nominal Sheath thickness	Overall Diameter (Approx.)
mm²	mm	mm	mm	mm	mm	mm
3x1.5	1.4	0.7	1	0.8	1.8	13.2
3x2.5	1.8	0.7	1	0.8	1.8	14.1
3x4	2.3	0.7	1	0.8	1.8	15.2
3x6	2.8	0.7	1	1.25	1.8	17.1
3x10	3.6	0.7	1	1.25	1.8	18.9
3x16	4.5	0.7	1	1.25	1.8	20.8
3x25	5.6	0.9	1	1.6	1.8	24.7
3x35	6.7	0.9	1	1.6	1.8	27.2
3x50	8	1	1	1.6	1.9	30.6
3x70	9.4	1.1	1	2	2.1	35.2
3x95	11	1.1	1.2	2	2.2	39.3
3x120	12.4	1.2	1.2	2	2.3	43
3x150	13.8	1.4	1.4	2.5	2.5	48.6
3x185	15.3	1.6	1.4	2.5	2.7	53
3x240	17.5	1.7	1.4	2.5	2.8	58.5
3x300	19.5	1.8	1.6	2.5	3	64
3x400	22.6	2	1.6	3.15	3.3	73.5

Three cores+1(Galvanized steel wire armoured)

IEC 60502-1 Cables

Nominal Cross Section	Diameter of Conductor (Approx.)		Nominal Insulation thickness		Nominal Inner Covering thickness	Nominal Steel Wire dia.	Nominal Sheath thickness	Overall Diameter (Approx.)
mm²	(3) mm	(1) mm	(3) mm	(1) mm	mm	mm	mm	mm
3x 16/10	4.5	3.6	0.7	0.7	1	1.6	1.8	22.7
3x 25/16	5.6	4.5	0.9	0.7	1	1.6	1.8	26.5
3x 35/16	6.7	4.5	0.9	0.7	1	1.6	1.9	29
3x 50/25	8	5.6	1	0.9	1	1.6	2.1	33
3x 70/35	9.4	6.7	1.1	0.9	1.2	2	2.2	38
3x 95/50	11	8	1.1	1	1.2	2	2.3	42.4
3x120/70	12.4	9.4	1.2	1.1	1.2	2	2.5	48
3x150/70	13.8	9.4	1.4	1.1	1.4	2.5	2.7	52
3x185/95	15.3	11	1.6	1.1	1.4	2.5	2.8	57.2
3x240/120	17.5	12.4	1.7	1.2	1.6	2.5	3.1	64
3x300/150	19.5	13.8	1.8	1.4	1.6	2.5	3.2	69.8
3x400/185	22.6	15.3	2	1.6	1.6	3.15	3.6	78.6

Four cores(Galvanized steel wire armoured)

IEC 60502-1 Cables

Nominal Cross Section	Diameter of Conductor (Approx.)	Nominal Insulation thickness	Nominal Inner Covering thickness	Nominal Steel Wire dia.	Nominal Sheath thickness	Overall Diameter (Approx.)
mm²	mm	mm	mm	mm	mm	mm
4x1.5	1.4	0.7	1	0.8	1.8	14
4x2.5	1.8	0.7	1	0.8	1.8	14.9
4x4	2.3	0.7	1	1.25	1.8	17
4x6	2.8	0.7	1	1.25	1.8	18.2
4x10	3.6	0.7	1	1.25	1.8	20.2
4x16	4.5	0.7	1	1.6	1.8	23
4x25	5.6	0.9	1	1.6	1.8	26.7
4x35	6.7	0.9	1	1.6	1.9	29.5
4x50	8	1	1	2	2.1	34.2
4x70	9.4	1.1	1.2	2	2.2	38.8
4x95	11	1.1	1.2	2	2.3	42.9
4x120	12.4	1.2	1.4	2.5	2.5	48.6
4x150	13.8	1.4	1.4	2.5	2.7	53.2
4x185	15.3	1.6	1.4	2.5	2.8	58.1
4x240	17.5	1.7	1.6	2.5	3.1	64.8
4x300	19.5	1.8	1.6	2.5	3.2	70.4
4x400	22.6	2	1.8	3.15	3.6	81.3