VFD Cables

Armoured VFD Cable With EMC Screening

These cables are used for fixed installation in most areas and on open deck in ships. Design to meet

requirements for Variable Frequency Drivers (VFD). Suitable for voltage peaks to 3kV (for cables ≥ 10mm2).

Conductor :Stranded copper conductor conforming to IEC60288 Class 5.

Insulation:XLPE insulation conforming to IEC60092-351.

Filler:Non-hygroscopic filler tape.

Shield:Copper tape with a 100% coverage.

Armor:Copper wire braid, coverage > 90%.

Sheath:A black, polyolefine plastic, SHF1 conforming to IEC 60092-359.

Rated voltage 1,8/3kV (3,6kV)

Maximum conductor temperature + 90 °C

Minimum recommended installation temperature -15 °C

Lowest operation temperature -40 °C

Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable

IEC 60332-3-22 -test for bunched wires and cables,category A

Halogen-free IEC 60754

Smoke emission IEC 61034

Transfer impedance IEC 61196-1 (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m])

Number of conductors & cross-section	Cross- section of screen	Nominal outer diameter	Approx- imate weight	Current rating	Min. bending radius fixed installation
n x mm2	mm3	mm	kg/km	A	mm
1x16	5,2	13,5	340	96	85
1x25	5,8	15,0	455	127	90
1x35	11,5	16,5	625	157	100
1x50	9,8	18,0	740	196	110
1x70	10,9	20,0	990	242	120
1x95	12,1	22,0	1275	293	135
1x120	13,2	23,5	1535	339	145
1x150	14,3	25,5	1830	389	155
1x185	15,4	27,5	2210	444	165
1x240	17,1	30,0	2830	522	180
1x300	18,6	33,0	3470	601	200
3x16	16,1	26,0	915	67	160
3x25	16,5	29,0	1215	89	175
3x35	18,2	31,5	1570	110	190
3x50	25,1	35,5	2040	137	215
3x70	35,0	39,0	2820	169	235
3x95	35,0	44,0	3645	205	265
3x120	38,1	48,0	4465	237	290
3x150	41,2	51,5	5335	272	310
3x95+3x16	35,0	44,0	4565	205	265
3x120+3x25	38,1	48,0	5190	237	290
3x150+3x25	41,2	51,5	6055	272	310