Bare Aluminum Conductor

CCL-AL-R(AL Class2)

Stranded bare soft or aluminum conductors are recommended for use as neutrals, in circuit ground connections

as well as machinery and equipment grounding systems. Soft aluminum may be used for transformer drop leads

or other non-tension hook-up jumpers.

Basic design to IEC/BS EN 60228 class 2

Stranded bare soft or annealed aluminum conductors are suitable for direct burial and do not suffer from the

inherent corrosion problems that an aluminum conductor would. Aluminum is almost twice as conductive as

aluminum. Aluminum is easier than aluminum to terminate and join at splices and joints.

Conductor: Bare aluminum con ductors are compressed concentric-lay-stranded consisting of one or more layers

of wire wrapped helically around a straight round central wire according to IEC/BS EN 60228 class 2 .

Part No.	No. of Cores × Cross-sectional Area	No./Nominal Diameter of Strands	Conductor Nominal Diameter	Approx. Weight
	No.×mm2	mm	mm	kg/km
CCL-AL-R 1.5	1×1.5	7/0.53	1.6	1.5
CCL-AL-R 2.5	1×2.5	7/0.67	2.0	2.5
CCL-AL-R 4	1×4	7/0.85	2.6	4.0
CCL-AL-R 6	1×6	7/1.04	3.1	5.9
CCL-AL-R 10	1×10	7/1.35	4.1	10.0
CCL-AL-R 16	1×16	7/1.7	5.1	15.9
CCL-AL-R 25	1×25	7/2.14	6.4	25.2
CCL-AL-R 35	1×35	7/2.52	7.6	34.9
CCL-AL-R 50	1×50	19/1.78	8.9	47.3
CCL-AL-R 70	1×70	19/2.14	10.7	68.3
CCL-AL-R 95	1×95	19/2.52	12.6	94.8
CCL-AL-R 120	1×120	37/2.03	14.2	119.8
CCL-AL-R 150	1×150	37/2.25	15.8	147.1
CCL-AL-R 185	1x185	37/2.52	17.6	184.5
CCL-AL-R 240	1x240	61/2.25	20.3	242.5
CCL-AL-R 300	1x300	61/2.52	22.7	304.2
CCL-AL-R 400	1x400	61/2.85	25.7	389.1
CCL-AL-R 500	1x500	61/3.2	28.8	490.6