|
Mining Cable
NSSHCGEOEU 0.6/1kV Coal Cutter Cable (High Tensile Stress)
Applications:
These cables are used for the connection of mobile machines under extremelyhigh mechanical loads, predominantly in miningsituations, e.g. for coal-cutting machines, also can beoperated via guide pulleys (cable cars) or used as areeling cable (LHD), suitable for extreme bending loads, high tensile stress,and impact and crushing loads.
Standards :
VDE 0250 Part 812
Construction:
Conductors:Flexible stranded tinned copper conductor.
Insulation: Heatresistant3GI3 rubber based on EPR.
Outer Conductor Layer: Easy strippable outer conductive layer.
Pilot Cores:Copper and steel conductor capable ofexpansion and compression with 3GI3 EPRrubber insulation.
Monitoring Conductor:Copper and steel conductorcapable of expansion and compression covert with semiconductive rubber compound.
InnerSheath:Rubber type GM1b.
Armour/Earth Conductor:Concentric earth conductor as tensile-stress-resistant braided armour of combined copper-steel wires.
Outer Sheath: Rubber type 5GM5, abrasion and tear resistant, oil resistant and flame retardant.
Dimensions and Weight:
| Number of Cores×Nominal Cross Section | Minimium Overall Diameter | Maximum Overall Diameter | Nominal Weight |
|---|---|---|---|
| No.×mm² | mm | mm | kg/km |
| 3×16/16KON+2ST+UEL | 38.5 | 41.5 | 2430 |
| 3×25/16KON+2ST+UEL | 41.0 | 44.5 | 3050 |
| 3×35/16KON+2ST+UEL | 44.5 | 48.0 | 3620 |
| 3×50/25KON+2ST+UEL | 50.0 | 54.0 | 4810 |
| 3×70/35KON+2ST+UEL | 54.5 | 58.5 | 5890 |
| 3×95/50KON+2ST+UEL | 62.5 | 66.5 | 7800 |
| 3×35/16KON+3ST+3UEL | 44.5 | 48.0 | 3860 |
| 3×50/25KON+3ST+3UEL | 50.0 | 54.0 | 5050 |
| 3×70/35KON+3ST+3UEL | 54.5 | 58.5 | 6000 |
| 3×95/50KON+3ST+3UEL | 62.5 | 66.5 | 8050 |
| 3×120/70KON+3ST+3UEL | 67.5 | 72.0 | 9380 |
| 3×150/70KON+3ST+3UEL | 74.5 | 79.0 | 11120 |