|
PE Insulated & LSZH Sheathed Cables to CW 1600
Application:
The cables are similar in design and application to CW 1308, but with Low Smoke Halogen Free cores and sheath. CW 1600 has the added advantage of an Aluminium/Polyester foil screen and drain wire. A fire barrier tape is included on cable with more than 6 pairs. The cables are used for the internal wiring of building when the need to protect people and equipment from smoke and fumes is paramount. The cables are designed to handle low frequency signals for short range applications and intended to be terminated in insulation displacement connectors (IDC).
Standards:
CW 1600
Construction:
Conductors: Solid annealed bare or tinned copper sized 0.5mm (24AWG respectively) as per class 1 of BS 6360/IEC 60228.
Insulation: Solid polyethylene as per BS 6234/IEC 60708
Twisted Pairs: Insulated conductors are twisted into pairs with varying lay length to minimize crosstalk
Cabling Element: Twisted Pairs/Triples/Quads
Cable Core Assembly: There are two modes of construction: layer for general use, including two cables for installation in customer’s premises where a good appearance is required; and unit of 20 pairs which includes an insulated earth conductor of 1.38mm, for use with customer distribution scheme.
Core Wrapping: Cable containing more than 12 wires have a polyester tape applied over the cable core prior to sheathing.
Screen: A 24μ aluminium polyester foil shield can be provided for fully enclosing the core with an overlap
Fire Barrier Tape: Mica glass tape is included in cable with more than 6 pairs for achieving the required fire properties
Sheath: LSZH compound. Grey, White, Cream or Black colours are available for options
Ripcord: Nylon ripcord may be placed parallel to the cores to facilitate sheath removal
Drain Wire: A solid tinned 0.5mm earth/continuity wire shall be laid longitudinally
Electrical & Mechanical Properties:
Nominal Conductor Diameter | mm | 0.5 | 1.38 |
---|---|---|---|
Conductor Size | mm2 | 0.196 | 1.495 |
Maximum Conductor Resistance @20°C | Ω/km | 97.8 | 12.4 |
Minimum Insulation Resistance @500V DC | MΩ.km | 50 | N/A |
Maximum Average Mutual Capacitance @0.8KHz-3.0KHz | nF/km | 80 | N/A |
Maximum Capacitance Unbalance @0.8KHz-3.0KHz pair-to-pair | pF/500m | 500 | N/A |
Minimum Insulation Thickness | mm | 0.15 | 0.55 |
Maximum Insulated Conductor Diameter | mm | 0.95 | 3.5 |
Mechanical and Thermal Properties:
Temperature range during operation (fixed state): -30°C – +70°C
Temperature range during installation (mobile state): -20°C – +50°C
Minimum bending radius: 7.5 x Overall Diameter
Fire Hazard Performance:
1) Minimum Smoke Emission | IEC 61034, EN 50268 ( New: EN 61034), VDE 0482-268 ( New: VDE 0482-1034) |
---|---|
2) Halogen Free | IEC 60754-1, EN 50267-2-1 |
3) Non corrosive gases | IEC 60754-2, EN 50267-2-2, VDE 0482-267 |
4) Reduced Fire Propagation | IEC 60332-3C, EN 50266-2-4, VDE 0482-266-2-4 |
5) Flame Retardancy | IEC 60332-1, VDE 0482-265-2-1 |
6) Temperature Index | BS EN ISO 4589-3, BS 2782 Part 1 |
7) Oxygen Index | BS EN ISO 4589-2, BS 2863 |
Color Code :
Colour Scheme for Pairs
Cabling
Element No. |
a-wire | b-wire | Cabling
Element No. |
a-wire | b-wire | ||
---|---|---|---|---|---|---|---|
1 | WHITE | Blue | BLUE | 13 | BLACK | Green | GREEN |
2 | WHITE | Orange | ORANGE | 14 | BLACK | Brown | BROWN |
3 | WHITE | Green | GREEN | 15 | BLACK | Grey | GREY |
4 | WHITE | Brown | BROWN | 16 | YELLOW | Blue | BLUE |
5 | WHITE | Grey | GREY | 17 | YELLOW | Orange | ORANGE |
6 | RED | Blue | BLUE | 18 | YELLOW | Green | GREEN |
7 | RED | Orange | ORANGE | 19 | YELLOW | Brown | BROWN |
8 | RED | Green | GREEN | 20 | YELLOW | Grey | GREY |
9 | RED | Brown | BROWN | 21 | VIOLET | Blue | BLUE |
10 | RED | Grey | GREY | 22 | VIOLET | Orange | ORANGE |
11 | BLACK | Blue | BLUE | 23 | VIOLET | Green | GREEN |
12 | BLACK | Orange | ORANGE | 24 | VIOLET | Brown | BROWN |
25 | VIOLET | Grey | GREY |
Note 1: Uppercase letters indicate the base, solid colour of insulation, and the lower case indicates ink bands applied onto the base colour.
Make Up & Unit Identification Colours – Unit
Pair Size | 20 Pairs | 40 Pairs | 80 Pairs | 100 Pairs | 160 Pairs | 320 Pairs |
---|---|---|---|---|---|---|
Number of Units | ||||||
Centre 1st Layer 2nd Layer |
1 | 4 X ½ | 1 | 1 | 4 X ½ | 1 |
6 X ½ | 8 X ½ | 6 | 5 | |||
10 | ||||||
Unit No. | Colours of Unit Lappings | |||||
1 | ORANGE | ORANGE | ORANGE | ORANGE | ORANGE | ORANGE |
2 | GREEN | ORANGE | ORANGE | GREEN | ORANGE | |
3 | NATURAL | NATURAL | ORANGE | NATURAL | ||
4 | GREEN | NATURAL | NATURAL | NATURAL | ||
5 | GREEN | NATURAL | NATURAL | |||
6 | NATURAL | GREEN | ||||
7 | NATURAL | ORANGE | ||||
7 | GREEN | NATURAL | ||||
9-15 | NATURAL | |||||
16 | GREEN |
Note 1: ½ refers to sub-units of 10 Pairs. Note 2: These cables include the single 1.38mm diameter insulated conductor.
Dimensions And Weight:
Cable Code | Number of Pairs |
Minimum Insulation
Thickness mm |
Pair Elements or Unit Size |
Minimum Sheath Thickness mm |
Maximum Overall Diameter mm |
Nominal Weight kg/km |
---|---|---|---|---|---|---|
0.5mm Conductor, 0.95mm Insulated Wire-Layer | ||||||
TP1600-2Y(St)H-2P05 | 2 | 0.15 | Prs1-2 | 0.6 | 4.5 | 23 |
TP1600-2Y(St)H-3P05 | 3 | 0.15 | Prs1-3 | 0.6 | 5.0 | 35 |
TP1600-2Y(St)H-4P05 | 4 | 0.15 | Prs1-4 | 0.6 | 5.8 | 40 |
TP1600 -2Y(St)H-6P05 | 6 | 0.15 | Prs1-6 | 0.6 | 6.8 | 51 |
TP1600-2Y(St)H-12P05 | 12 | 0.15 | Prs1-12 | 0.7 | 9.1 | 92 |
TP1600-2Y(St)H-25P05 | 25 | 0.15 | Prs1-25 | 0.8 | 11.4 | 167 |
0.5mm Conductor, 0.95mm Insulated Wire-Unit | ||||||
TP1600-2Y(St)H-(10P+E)05 | 10+E | 0.15 | 1/2X20 | 0.6 | 8.6 | 102 |
TP1600-2Y(St)H-(20P+E)05 | 20+E | 0.15 | 20 | 0.7 | 12.0 | 157 |
TP1600-2Y(St)H-(40P+E)05 | 40+E | 0.15 | 20 | 0.9 | 15.0 | 271 |
TP1600-2Y(St)H-(50P+E)05 | 50+E | 0.15 | 20 | 1.0 | 18.0 | 341 |
TP1600-2Y(St)H-(80P+E)05 | 80+E | 0.15 | 20 | 1.2 | 22.5 | 496 |
TP1600-2Y(St)H-(100P+E)05 | 100+E | 0.15 | 20 | 1.5 | 27.0 | 633 |
TP1600-2Y(St)H-(160P+E)05 | 160+E | 0.15 | 20 | 1.7 | 30.3 | 960 |
TP1600-2Y(St)H-(320P+E)05 | 320+E | 0.15 | 20 | 2.2 | 39.5 | 1840 |
Note: The “E” in the table above indicates that the cable contains an earth-wire.