|
Windmill Cables
LSOH Screened Torsion Resistant Loop Cable 0.6/1kV
Application:
These cables are designed for special application condition in wind turbines, special for medium mechanical stress and for operation under permanent influence of seawater and usage outdoor.
Standards:
IEC 60502
EN 50363
HD 22.13
Construction:
Conductor: Stranded bare copper conductor.
Insulation: Extruded halogen free rubber compound EI8.
Screen: Tinned wire copper braid.
Sheath: Extruded halogen free EVA compound EM8.
Technical Data:
Rated Voltage Uo/U (Um):0.6/1 kV
Operating Temperatures:flexing: -35℃~+90℃; fixed installation: -40℃~+90℃
Minimum Bending Radii:fixed: 4×OD; flexing: 6×OD
Torsion Application:± 100 °/m
Maximum Permissible Tensile Load:15 N/mm² (in operation)
Short-circuit Temperature:250℃
Flame Retardant:EN 50265-2-1
Halogen Free:IEC 60754
Smoke Density:IEC 61034
Oil Resistant:Yes
Ozone Resistant:Yes
Silicone Free:Yes
Dimensions and Weight:
| Construction | Nominal Overall Diameter | Nominal Weight |
|---|---|---|
| No. of cores×mm² | mm | kg/km |
| 25×0.75 | 18.0 | 500 |
| 25×1 | 20.0 | 550 |
| 4×1.5 | 10.0 | 150 |
| 12×1.5 | 16.0 | 400 |
| 32×1.5 | 26.0 | 950 |
| 42×1.5 | 35.0 | 1700 |
| 12×2.5 | 23.0 | 620 |
| 5×2.5 | 15.0 | 300 |
| 4×4 | 13.5 | 300 |