IEEE cable standards
IEEE cable standards
| IEEE cable standard code | name |
|---|---|
| IEEE 1073.3.2-2000 | (Medical device communications - Transport profile - IrDA based cable connected) |
| IEEE 1073.4.1-2000 | (Medical device communications - Physical layer interface - Cable connected) |
| IEEE 1120-1990 | (Guide to the factors to be considered in the planning, design, and installation of submarine power and communications cables) |
| IEEE 1143-1994 | (Guide on shielding practice for low voltage cables) |
| IEEE 1185-1994 | (Guide for installation methods for generating station cables) |
| IEEE 1202-1991 | (Flame testing of cables for use in cable tray in industrial and commercial occupancies) |
| IEEE 1210-1996 | (Determining compatibility of cable pulling lubricants with wire and cable) |
| IEEE 1235-2000 | (Guide for the properties of identifiable jackets for underground power cables and ducts) |
| 2-1999 | (Guide for specifying and selecting power, control, and special-purpose cable for petroleum and chemical plants) |
| IEEE 1300-1996 | (Guide for cable connections for gas-insulated substations) |
| IEEE 1333-1994 | (Guide for installation of cable using the guided boring method) |
| IEEE 1406-1998 | (Guide to the use of gas-in-fluid analysis for electric power cable systems) |
| IEEE 1407-1998 | (Trial-use guide for accelerated aging tests for medium-voltage extruded electric power cables using water-filled tanks) |
| IEEE 383-1974 | (Type test of class 1E electric cables; field splices and connections for nuclear power generating stations) |
| IEEE 400-2001 | (Guide for field testing and evaluation of the insulation of shielded power cable systems) |
| IEEE 404-2000 | (Extruded and laminated dielectric shielded cable joints rated 2500 V to 500000 V) |
| IEEE 48-1996 | (Test procedures and requirements for alternating-current cable terminations 2.5 kV through 765 kV) |
| IEEE 525-1992 | (Guide for the design and installation of cable systems in substations) |
| IEEE 532-1993 | (Guide for selecting and testing jackets for underground cables) |
| IEEE 576-2000 | (Recommended practice for installation, termination, and testing of insulated power cable as used in industrial and commercial applications) |
| IEEE 592-1990 | (Exposed semiconducting shields on high-voltage cable joints and separable insulated connectors) |
| IEEE 628-2001 | (Criteria for the design, installation, and qualification of raceway systems for class 1E circuits for nuclear power generating stations) |
| IEEE 635-1989 | (Guide for selection and design of aluminium sheaths for power cables) |
| IEEE 664-1993 | (Guide for laboratory measurement of the power dissipation characteristics of aeolian vibration dampers for single conductors) |
| IEEE 835-1994 | (Power cable ampacity tables) |
| IEEE 848-1996 | (Procedure for the determination of the ampacity derating of fire-protected cables) |
| IEEE C 62.22.1-1996 | (Guide for the connection of surge arresters to protect insulated, shielded electric power cable systems) |