NF cable standard
NF cable standards
| NF cable standard code | Name |
|---|---|
| NF A37-601-1-1999 | (Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Part 1 : land cables.) |
| NF A37-601-2-1999 | (Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Part 2 : submarine cables.) |
| NF A50-110-3-2003 | (Aluminium and aluminium alloys - Scrap - Part 3 : wire and cable scrap.) |
| NF A58-002-1999 | (Lead and lead alloys - Lead alloys ingots for electric cable sheathing and for sleeves.) |
| NF A82-110-2001 | (Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics.) |
| NF A82-111-1989 | (ELECTRIC RESISTANCE WELDING. LOW IMPEDANCE CABLES. SIZES,SPECIFICATIONS AND TESTS.) |
| NF A82-112-1-2002 | (Water-cooled secondary connection cables for resistance welding - Part 1 : dimensions and requirements for double-conductor connection cables.) |
| NF A82-112-2-2002 | (Water-cooled secondary connection cables for resistance welding - Part 2 : dimensions and requirements for single-conductor connection cables.) |
| NF A82-112-3-1996 | (WATER-COOLED SECONDARY CONNECTION CABLES FOR RESISTANCE WELDING. PART 3 : TEST REQUIREMENTS. (EUROPEAN STANDARD EN ISO 8205-3).) |
| NF A85-009-12-1997 | (Arc welding equipment. Part 12 : coupling devices for welding cables.) |
| NF A85-610-1984 | (CONNECTORS FOR ARC WELDING CABLES. SAFETY RULES. REQUIREMENTS. TYPE TESTS. MARKING.) |
| NF B55-007-1965 | (FINISHED PRODUCTS. WOODEN REELS FOR INSULATED CONDUCTORS AND CABLES.) |
| NF C01-461-1985 | (Electrotechnical vocabulary. Chapter 461 : electric cables.) |
| NF C01-461/A1-1999 | (Electrotechnical Vocabulary - Chapter 461 : electric cables.) |
| NF C01-461/A2-1999 | (Electrotechnical Vocabulary - Chapter 461 : electric cables.) |
| NF C18-440-2002 | (Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV.) |
| NF C26-113-8-1996 | (Insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 8 : mica paper tapes for flame-resistant security cables.) |
| NF C27-106-1990 | (Fluides for electrotechnical applications. Specification for unused insulating mineral oils for cables with oil ducts.) |
| NF C30-101-2003 | (Impulse tests on cables and their accessories.) |
| NF C30-201-2001 | (Marking by inscription for the identification of cores of electric cables.) |
| NF C30-202-2000 | (System for cable designation.) |
| NF C30-2026-1993 | () |
| NF C30-203-1994 | (Insulated cables and flexible cords. Determination of dimensions of insulated cables and flexible cords calculation methods.) |
| NF C30-204-1988 | (INSULATED CABLES AND FLEXIBLE CORDS. MARKING OF CABLES.) |
| NF C30-205-1994 | (Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V.) |
| NF C30-400-2003 | (Electromagnetic locators for buried pipes and cables - Performance and safety.) |
| NF C32-013-1981 | (Insulated cables and flexible cords. Conductors of insulated cables.) |
| NF C32-021-1985 | (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. TEST METHODS FOR CABLES AND CORDS USED UNDER SPECIAL CONDITIONS.) |
| NF C32-022-2003 | (Method for spark testing of cables.) |
| NF C32-024-1996 | (Insulating and sheathing materials of electric cables. Common test methods. Part 1 : general application. Section 1 : measurement of thickness and overall dimensions. Tests for determining the mechanical properties.) |
| NF C32-024/A1-2001 | (Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-1 : general application - Measurement of thickness and overall dimensions - Tests for determining the m) |
| NF C32-025-1996 | (Insulating and sheathing materials of electric cables - Common test methods - Part 1 : general application - Section 2 : thermal ageing methods.) |
| NF C32-025/A2-2001 | (Insulating and sheathing materials of electric cables - Common test methods - Part 1 : general application - Section 2 : thermal ageing methods.) |
| NF C32-026-1996 | (Insulating and sheathing materials of electric cables. Common test methods. Part 1 : general application. Section 3 : methods for determining the density. Water absorption tests. Shrinkage test.) |
| NF C32-026/A1-2001 | (Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-3 : general application - Methods for determining the density - Water absorption tests - Shrinkage test) |
| NF C32-027-1996 | (Insulating and sheating materials of electric cables. Common test methods. Part 1 : general application. Section 4 : test at low temperature.) |
| NF C32-027/A2-2002 | (Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4 : general application - Tests at low temperature.) |
| NF C32-028-1999 | (Insulating and sheating materials of electric and optical cables - Common test methods - Part 2-1 : methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests.) |
| NF C32-028/A1-2002 | (Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1 : methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tes) |
| NF C32-029-1996 | (Insulating and sheathing materials of electric cables. Common test methods. Part 3 : methods specific to PVC compounds. Section 1 : pressure test at high temperature. Tests for resistance to cracking.) |
| NF C32-029/A2-2001 | (Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-1 : methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cra) |
| NF C32-030-1996 | (Insulating and sheathing materials of electric cables. Common test methods. Part 3 : methods specific to PVC compounds. Section 2 : loss of mass test. Thermal stability test.) |
| NF C32-031-1996 | () |
| NF C32-032-2000 | () |
| NF C32-033-2000 | () |
| NF C32-051-2003 | (Lead and lead alloys - Lead and lead alloys sheaths and sleeves of electric cables.) |
| NF C32-060-1996 | (Polyolefin insulation and sheath for communication cables.) |
| NF C32-062-2-1995 | (Electronic components. Halogen free materials for sheath used in communication cables with particular fire related properties.) |
| NF C32-070-2001 | (Insulated cables and flexible cords for installations - Classification tests on cables and cords with respect to their behaviour to fire.) |
| NF C32-072-1-2001 | (Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 1 : apparatus.) |
| NF C32-072-21-2001 | (Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1 : procedures - Category A F/R.) |
| NF C32-072-22-2001 | (Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2- 2 : procedures - Category A.) |
| NF C32-072-23-2001 | (Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-3 : procedures - Category B.) |
| NF C32-072-24-2001 | (Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4 : Procedures - Category C.) |
| NF C32-072-25-2001 | (Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-5 : Procedures - Small cables - Category D.) |
| NF C32-073-1-2000 | (Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1 : apparatus.) |
| NF C32-073-2-2000 | (Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2 : procedure.) |
| NF C32-074-1993 | (TEST ON GASES EVOLVED DURING THE COMBUSTION OF MATERIALS FROM CABLES. DETERMINATION OF DEGREE OF ACIDITY (CORROSIVITY) OF GASES BY MEASURING PH AND CONDUCTIVITY.) |
| NF C32-074-21-2000 | (Common test methods for cables under fire conditions - Test on gases evolved during combustion of materials from cables - Part 2-1 : procedures - Determination of the amount of halogen acid gas.) |
| NF C32-076-2001 | (Method of test for resistance to fire of unprotected small cables for use in emergency circuits.) |
| NF C32-077-2003 | (Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits.) |
| NF C32-080-1998 | (GUIDE TO USE OF LOW VOLTAGE HARMONIZED CABLES.) |
| NF C32-080/A1-2003 | (Guide to use of low voltage harmonized cables.) |
| NF C32-081-2002 | (Identification of cores in cables and flexible cords.) |
| NF C32-0902-1993 | () |
| NF C32-102-1-2003 | (Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 1 : general requirements.) |
| NF C32-102-10-1999 | (RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 10 : EPR INSULATED AND POLYURETHANE SHEATHED FLEXIBLE CABLE.) |
| NF C32-102-11-1999 | (RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 11 : EVA CORDS AND FLEXIBLE CABLES.) |
| NF C32-102-12-1999 | (RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 12 : HEAT RESISTANT EPR CORDS AND FLEXIBLE CABLES.) |
| NF C32-102-13/A1-2000 | (Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13 : single and multicore flexible cables, isulated and sheathed with crosslinked polymer and having low emission of smok) |
| NF C32-102-14-2003 | (Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 14 : cords for applications requiring high flexibility.) |
| NF C32-102-16-2000 | (Rubber insulated cables of rated voltages up to and including 450/750 V - Part 16 : water resistant polychloroprene or equivalent synthetic elastomer sheathed cables.) |
| NF C32-102-2-1999 | (Rubber insulated cables of rated voltages up to and including 450/750 V. Part 2 : test methods.) |
| NF C32-102-2/A1-2003 | (Cables of rated voltage up to and including 450/750 V and having cross-linked insulation - Part 2 : test methods.) |
| NF C32-102-3-1999 | (Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3 : heat resistant silicone rubber insulated cables.) |
| NF C32-102-4-1999 | (Rubber insulated cables of rated voltages up to and including 450/750 V - Part 4 : cords and flexible cables.) |
| NF C32-102-4/A2-2003 | (Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 4 : cords and flexible cables.) |
| NF C32-102-9-1999 | (RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 9 : SINGLE CORE NON-SHEATHED CABLES FOR FIXED WIRING HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES.) |
| NF C32-103-1980 | (Insulated cables and flexible cords for installations. Rubber insulated lift cables for normal use.) |
| NF C32-111-1982 | (Insulated cables and flexible cords for installations. Cross-linked polyethylene insulated cables.) |
| NF C32-120-1985 | (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. SERIES OF THE NATIONAL TYPE OF CATEGORY 1.) |
| NF C32-130-1990 | () |
| NF C32-131-1989 | () |
| NF C32-201-1-1998 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 1 : general requirements.) |
| NF C32-201-1-2003 | (Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 1 : general requirements.) |
| NF C32-201-10-2001 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 10 : extensible leads.) |
| NF C32-201-11/A1-2001 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 11 : cables for luminaires.) |
| NF C32-201-12-1999 | (POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 12 : HEAT-RESISTANT FLEXIBLE CABLES (CORDS).) |
| NF C32-201-12/A1-2001 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 12 : heat-resistant flexible cables (cords).) |
| NF C32-201-13/A1-2001 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 13 : oil resistant PVC sheathed cables with two or more conductors.) |
| NF C32-201-14-2003 | (Cables of rated voltage up to and including 450/750 V and having thermoplastic insulation - Part 14 : flexible cables (cords), insulated and sheathed with halogen-free thermoplastic compounds.) |
| NF C32-201-2-1998 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 2 : test methods.) |
| NF C32-201-2/A1-2003 | (Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 2 : test methods.) |
| NF C32-201-3-1998 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 3 : non-sheathed cables for fixed wiring.) |
| NF C32-201-3/A1-2000 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3 : non-sheathed cables for fixed wiring.) |
| NF C32-201-5-1998 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 5 : flexible cables.) |
| NF C32-201-5/A1-2000 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5 : flexible cables.) |
| NF C32-201-5/A2-2001 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5 : flexible cables.) |
| NF C32-201-7-1998 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 7 : single core non-sheathed cables for internal wiring for a conductor temperature of 90 degrees Celsius.) |
| NF C32-201-7/A1-2000 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7 : single core non-sheathed cables for internal wiring for a conductor temperature of 90 o.) |
| NF C32-201-9-1998 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 9 : single core non-sheathed cables for installation at low temperature.) |
| NF C32-201-9/A1-2000 | (Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9 : single core non-sheathed cables for installation at low temperature.) |
| NF C32-204-2000 | (Insulated cables and flexible cords for installations - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Non sheathed cable for decorative chains - Harmonized seri) |
| NF C32-206-1988 | (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. POLYVINYL CHLORIDE INSULATED AND POLYVINYL CHLORIDE SHEATHED FLEXIBLE CABLES FOR INTERNAL WIRING OF MACHINE-TOOLS AND FOR USE IN INDUSTRIAL INSTALLATIONS. SERIES OF THE NATIONAL TYPE OF CATEGORY 2.) |
| NF C32-207-1996 | (Insulated cables and flexible cords for installatins. Polyvinyl chloride insulated cables covered with a light polyvinyl chloride sheath, of rated voltage 300/500 V. Series of the national type.) |
| NF C32-208-1985 | (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. PVC INSULATED SINGLE-CORE NON SHEATHED CABLES WITH RIGID STRANDED ALUMINIUM CONDUCTOR OF RATED VOLTAGES 450/750 V. SERIES OF THE NATIONAL TYPE OF CATEGORY 2.) |
| NF C32-2081-1991 | () |
| NF C32-209-1988 | (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. PCV INSULATED CABLES FOR VERY LOW VOLTAGE CIRCUIT.) |
| NF C32-211-1989 | (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. FLAT FLEXIBLE CABLES POLYVINYL CHLORIDE INSULATED AND SHEATHED FOR LIGHTING CHAINS OF CLASS II.) |
| NF C32-213-1998 | (Cables for portable earthing and short-circuiting equipment.) |
| NF C32-213/A11-2003 | (Cables for portable earthing and short-circuiting equipment.) |
| NF C32-215-1998 | (Flexible cables for lifts.) |
| NF C32-220-1985 | (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. SERIES OF THE NATIONAL TYPE OF THE CATEGORY 1.) |
| NF C32-2201-1991 | () |
| NF C32-2202-1993 | () |
| NF C32-300-2002 | (Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1 : cables.) |
| NF C32-301-2002 | (Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2 : terminations.) |
| NF C32-302-2001 | (Mineral insulated cables with a rated voltage not exceeding 750 V - Part 3 : guide to use.) |
| NF C32-310-1996 | (Insulated cables and flexible cords for installation. Fire resistant (class CR1) cables and flexible cords for rated voltage up to and including 0,6/1 kv.) |
| NF C32-320-1982 | (Insulated cables and flexible cords for installations. Cross-linked polyethylene insulated cables covered with a polychloroprene sheath.) |
| NF C32-321-1982 | (Insulated cables and flexible cords for installations. Crossed-linked polyethylene insulated cables covered with a polyvinyl chloride sheath.) |
| NF C32-322-1982 | (Insulated cables and flexible cords for installations. Cross-linked polyethylene insulated cables covered with a polyvinyl chloride sheath, with a metallic armour.) |
| NF C32-323-1988 | (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. HALOGEN-FREE 0,6/1 KV CABLES WITH IMPROVED CHARACTERISTICS IN THE CASE OF FIRE,TYPE C1,WITH CROSS-LINKED SYNTHETIC INSULATION AND WITH EXTRUDED SYNTHETIC PROTECTIVE SHEATH.) |
| NF C32-330-2002 | (Insulated cables and flexible cords for installations - Heating equipment by means of heating cables, with metallic covering for embedding into walls of buildings.) |
| NF C32-331-2002 | (Insulated cables and flexible cords for installations - Cables for supply leads for heating equipment by means of heating cable for embedding in walls of building.) |
| NF C32-332-2002 | (Insulated cables and flexible cords for installations - Cables for supply leads with metallic covering for heating equipment by means of heating cables, with metallic covering, for embedding in walls) |
| NF C32-333-2002 | (Insulated cables and flexible cords for installations - Heating equipment by means of heating cables, with metallic covering for embedding into walls of buildings, with low electromagnetic radiation.) |
| NF C32-334-2002 | (Insulated cables and flexible cords for installations - Cables for supply leads with low electromagnetic radiations for heating equipment by means of heating cables, with metallic covering, for embedd) |
| NF C32-335-2003 | (Insulated cables and flexible cords for installations - Heating cables, without mechanical protection and reduced cross sectional area.) |
| NF C32-500-1998 | (Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV.) |
| NF C32-500/A1-2003 | (Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV.) |
| NF C32-902-1998 | (INSULATED CABLES AND CORDS FOR INSTALLATIONS. POWER CABLE ACCESSORIES INTENDED FOR INDUSTRY, FOR RATED VOLTAGE 0,6/1(1,2) KV. TEST METHODS AND TEST REQUIREMENTS.) |
| NF C33-002-1998 | (Insulated cables and their accessories for power systems. Accessories of distribution cables of rated voltage 0,6/1 (1,2) kV. Test methods and requirements.) |
| NF C33-004-1998 | (Insulated cables and their accessories for power systems. Connecting equipment for overhead distributions and services of rated voltage 0,6/1 kV with at least one insulated core. Electrical ageing test.) |
| NF C33-014-1995 | (Insulated cables and their accessories for power systems. Screen tape for single-core cables of rated voltages from 6/10 (12) kv to 18/30 (36) kv.) |
| NF C33-020-1998 | (Insulated cables and their accessories for power systems. Insulation piercing branch-connectors for overhead distributions and services with bundle assembled cores, of rated voltage 0,6/1 kV.) |
| NF C33-021-1998 | (Insulated cables and their accessories for power systems. Pre-insulated compression type connecting equipment for overhead distributions and services with bundle assembled cores, of rated voltage 0,6/1 kV.) |
| NF C33-030-1999 | (INSULATED CABLES AND THEIR ACCESSORIES FOR POWER SYSTEMS. JOINT EQUIPMENT FOR OVERHEAD-UNDERGROUND CONNECTIONS BETWEEN BUNDLE ASSEMBLED CORES AND UNDERGROUND CABLES, OF RATED VOLTAGE 0,6/1 KV.) |
| NF C33-100M1-1967 | () |
| NF C33-209-1996 | (Insulated or protected cables for power systems. Bundle assembled cores for overhead systems of rated voltage 0,6/1 kv.) |
| NF C33-214-1999 | (Insulated or protected cables for power systems - Branch cables with remote reading cable.) |
| NF C33-220-1988 | (Insulated or protected cables for power systems. Extruded solid dielectric insulated cables for rated voltages from 1,8/3(3,6) kv up to 18/30(36) kv.) |
| NF C33-221-1990 | (Insulated or protected cables for power system concentric cables for road and street lighting for rated voltage of 3,6/6 (7,2) kv.) |
| NF C33-223-1998 | (Insulated cables and their accessories for power systems. Cross-linked polyethylene cables of rated voltages from 6/10 (12) kV up to 18/30 (36) kV for distribution networks.) |
| NF C33-252-2002 | (Insulated or protected cables for power systems - Single-core cables with polymeric insulation of rated voltages above 30 kV (Um equal to 36 kV) up to 150 kV (Um equal to 170 kV).) |
| NF C33-400-2001 | (Insulated cables for power systems - Energy-meter instrument cables.) |
| NF C42-324-1993 | (Extension and compensating cables for thrermocouples. Composition, nature of materials, manufacturing tests.) |
| NF C42-325-1996 | (Mineral insulated thermocouple cables and thermocouples.) |
| NF C52-036-2003 | (Bushings for transformers and reactor cable boxes not exceeding 36 kV.) |
| NF C52-199-2003 | (Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72, 5 kV to 550 kV.) |
| NF C61-720-1997 | (Electrical accessories. Cable reels for household and similar purposes.) |
| NF C63-060-1969 | (LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. TERMINALS FOR CONNECTION OF COPPER CONDUCTORS. DESIGNATION AND SPECIFICATION.) |
| NF C63-316-2000 | (Industrial cable reels.) |
| NF C63-425-1996 | (Low-voltage switchgear and controlgear assemblies. Part 5 : particular requirements for assemblies intended to be installed outdoors in public places. Cable distribution cabinets (cdcs) for power distribution in networks.) |
| NF C68-103-1986 | (FITTINGS FOR WIRINGS. CONDUITS INTENTED FOR THE PROTECTION OF ELECTRIC CABLES,CORDS AND WIRES WHICH ARE NOT IN ACCORDANCE WITH A SPECIFIC STANDARD. TEST METHODS.) |
| NF C68-111/A11-2002 | (Conduit systems for cable management - Part 2-1 : particular requirements for rigid conduit systems.) |
| NF C68-112/A11-2002 | (Conduit systems for cable management - Part 2-2 : particular requirements for pliable conduit systems.) |
| NF C68-113/A11-2002 | (Conduit systems for cable management - Part 2-3 : particular requirements for flexible conduit systems.) |
| NF C68-114/A1-2001 | (Conduit systems for cable management - Part 2-4 : particular requirements for conduit systems buried underground.) |
| NF C68-120-1997 | (CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 085-1).) |
| NF C68-120/A1-2002 | (Cable trunking systems and cable ducting systems for electrical installations - Part 1 : general requirements.) |
| NF C68-137-2002 | (Cable tray systems and cable ladder systems for cable management.) |
| NF C68-146-2000 | (Cables ties for electrical installations.) |
| NF C68-302-1999 | (Metric cable glands for electrical installations.) |
| NF C68-302/A1-2001 | (Metric cable glands for electrical installations.) |
| NF C83-402-2003 | (Sectional specification : Cable outlet accessories for connectors, including qualification approval and capability approval.) |
| NF C90-101-1-1994 | (Cable networks for television signals, sound signals and interactive services - Part 1 : safety requirements.) |
| NF C90-101-1/A1-1997 | (Cable networks for television signals, sound signals and interactive services - Part 1 : safety requirements.) |
| NF C90-101-1/A2-1998 | (Cable networks for television signals, sound signals and interactive services - Part 1 : safety requirements.) |
| NF C90-101-10-2002 | (Cable networks for television signals, sound signals and interactive services - Part 10 : system performance for return paths.) |
| NF C90-101-11-1997 | () |
| NF C90-101-2-2002 | (Cable networks for television signals, sound signals and interactive services - Part 2 : electromagnetic compatibility for equipment.) |
| NF C90-101-21-1997 | () |
| NF C90-101-3-1999 | (Cables networks for television signals, sound signals and interactive services. Part 3 : active wideband equipment for coaxial cable networks.) |
| NF C90-101-4-1999 | (Cable networks for television signals, sound signals and interactive services. Part 4 : passive wideband equipment for coaxial cable networks.) |
| NF C90-101-5-2002 | (Cabled networks for television signals, sound signals and interactive services - Part 5 : headend equipment.) |
| NF C90-101-6-1998 | (Cable networks for television signals, sound signals and interactive services. Part 6 : optical equipment.) |
| NF C90-101-7-1996 | (Cable networks for television signals, sound signals and interactive services - Part 7 : system performance.) |
| NF C90-101-7/A1-2001 | (Cable networks for television signals, sound signals and interactive services - Part 7 : systems performance.) |
| NF C90-101-8-2001 | (Cable networks for television signals, sound signals and interactive services - Part 8 : electromagnetic compatibility for networks.) |
| NF C90-101-9-1999 | (Cable networks for television signals, sound signals and interactive services - Part 9 : interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams.) |
| NF C90-130-1-2002 | (Coaxial cables - Part 1 : generic specification.) |
| NF C90-130-1986 | (TELECOMMUNICATION AND ELECTRONIC EQUIPMENT. COAXIAL CABLES FOR INDIVIDUAL OR CENTRAL BROADCASTING RECEPTION ANTENNAS.) |
| NF C90-130-2-1-2002 | (Coaxial cables - Part 2-1 : sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz.) |
| NF C90-130-3-1-2002 | (Coaxial cables - Part 3-1 : sectionnal specifications for cables used in Telecom applications - Miniaturized cables used in digital communication systems.) |
| NF C90-130-3-1999 | (Coaxial cables used in cabled distribution networks - Part 3 : sectional specification for outdoor drop cables.) |
| NF C90-480-1-2001 | (Information technology - Cabling installation - Part 1 : specification and quality assurance.) |
| NF C90-480-1997 | (Information technology. Generic cabling systems.) |
| NF C90-480-2-2001 | (Information technology - Cabling installation - Part 2 : installation planning and practices inside buildings.) |
| NF C90-485-1-2003 | (Information technology - Generic cabling systems - Part 1 : general requirements and office aeras.) |
| NF C93-406-4-110-2002 | (Connectors for electronic equipment - Part 4-110 : printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full) |
| NF C93-406-7-2001 | (Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7 : cable outlet accessories with assessed quality, including qualification and capability approval -) |
| NF C93-428-1981 | (ELECTRONIC COMPONENTS. CONNECTING DEVICES. INSULATION DISPLACEMENT CONNECTORS. TYPE HE 10. GENERAL REQUIREMENTS.) |
| NF C93-430-9-1998 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 9 : two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in).) |
| NF C93-521-1972 | (ELECTRONIC COMPONENTS. LOW FREQUENCY EQUIPMENT WIRES AND CABLES WITH SOLID OR STRANDED CONDUCTORS,PVC INSULATION AND SHEATH. GENERAL REQUIREMENTS.) |
| NF C93-521M1-1973 | (ELECTRONIC COMPONENTS. LOW FREQUENCY EQUIPMENT WIRES AND CABLES WITH SOLID OR STRANDED CONDUCTORS,PVC,INSULATION AND SHEATH. GENERAL REQUIREMENTS.) |
| NF C93-521M2-1977 | () |
| NF C93-526-1990 | (Electronic components. Telecommunications local networks cables with polyolefin insulation and polyolefin sheath. Generic specification.) |
| NF C93-527-1-1991 | (Telecommunications local networks cables with polyolefin insulation and polyolefin sheath. Product standards.) |
| NF C93-527-10-1992 | (Telecommunications local networks cables with polyolefin insulation and polyolefin sheath. Product standards.) |
| NF C93-527-11-1992 | (Telecommunications local networks cables with polyolefin insulation and polyolefin sheath. Product standards.) |
| NF C93-527-12-1997 | (ELECTRONIC COMPONENTS. TELECOMMUNICATIONS LOCAL NETWORKS CABLES WITH POLYOLEFIN INSULATION AND POLYOLEFIN SHEATH. PRODUCT STANDARDS.) |
| NF C93-527-2-1991 | (Telecommunication local networks cable with polyolefin insulation and polyolefin sheath. Product standards.) |
| NF C93-527-3-1991 | (Telecommunications local networks cables with polyolefin insulation and polyolefin sheath. Product standards.) |
| NF C93-527-4-1991 | (Telecommunications local neworks cables with polyolefin insulation and polyolefin sheath. Product standards.) |
| NF C93-527-5-1991 | (Telecommunications local networks cables with polyolefin insulation and polyolefin sheath. Product standards.) |
| NF C93-527-6-1991 | (Telecommunications local networks cables with polyolefin insulation and polyolefin sheath. Product standards.) |
| NF C93-527-7-1991 | (Telecommunications local networks cables with polyolefin insulation and polyolefin sheath. Product standards.) |
| NF C93-527-8-1991 | (Telecommunications local networks cables with polyolefin insulation. Product standards.) |
| NF C93-527-9-1991 | (Telecommunications local networks cables with polyolefin insulation and polyolefin sheath. Product standards.) |
| NF C93-528-1993 | (ELECTRONIC COMPONENTS. TELECOMMUNICATIONS LOCAL NETWORKS CABLES WITH POLYOLEFIN INSULATION AND POLYOLEFIN SHEATH. QUALITY ASSESSMENT PROCEDURES.) |
| NF C93-537-1-1-2001 | (Communication cables - Specifications for test methods - Part 1-1 : electrical test methods - General requirements.) |
| NF C93-537-1-10-2002 | (Communication cables - Specifications for test methods - Part 1-10 : electrical test methods - Crosstalk.) |
| NF C93-537-1-11-2002 | (Communication cables - Specifications for test methods - Part 1-11 : electrical test methods - Characteristic impedance, input impedance, return loss.) |
| NF C93-537-1-2-2001 | (Communication cables - Specifications for test methods - Part 1-2 : electrical test method - DC resistance.) |
| NF C93-537-1-3-2001 | (Communication cables - Specifications for test methods - Part 1-3 : electrical test method - Dielectric strengh.) |
| NF C93-537-1-4-2001 | (Communication cables - Specifications for test methods - Part 1-4 : electrical test methods - Insulation resistance.) |
| NF C93-537-1-5-2001 | (Communication cables - Specifications for test methods - Part 1-5 : electrical test methods - Capacitance.) |
| NF C93-537-1-6-2002 | (Communication cables - Specifications for test methods - Part 1-6 : electrical test methods - Electromagnetic performance.) |
| NF C93-537-1-7-2001 | (Communication cables - Specifications for test methods - Part 1-7 : electrical test methods - Velocity of propagation.) |
| NF C93-537-1-8-2001 | (Communication cables - Specifications for test methods - Part 1-8 : electrical test methods - Attenuation.) |
| NF C93-537-1-9-2002 | (Communication cables - Specifications for test methods - Part 1-9 : electrical test methods unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss).) |
| NF C93-537-3-1-2001 | (Communication cables - Specifications for test methods - Part 3-1 : mechanical test methods - General requirements.) |
| NF C93-537-3-11-2001 | (Communication cables - Specifications for test methods - Part 3-11 : mechanical test methods - Cable cut-through resistance.) |
| NF C93-537-3-12-2001 | (Communication cables - Specifications for test methods - Part 3-12 : mechanical test methods - Shot gun damage.) |
| NF C93-537-3-13-2003 | (Communication cables - Specifications for test methods - Part 3-13 : mechanical test methods - Aeolian vibration.) |
| NF C93-537-3-15-2003 | (Communication cables - Specifications for test methods - Part 3-15 : mechanical test methods - Underwater cable resistance to hydrostatic pressure.) |
| NF C93-537-3-16-2001 | (Communication cables - Specifications for test methods - Part 3-16 : mechanical test methods - Cable tensile performance.) |
| NF C93-537-3-17-2002 | (Communication cables - Specifications for test methods - Part 3-17 : mechanical test methods - Adhesion of dielectric and sheath.) |
| NF C93-537-3-2-2001 | (Communication cables - Specifications for test methods - Part 3-2 : mechanical test methods - Tensile strength and elongation for conductor.) |
| NF C93-537-3-4-2001 | (Communication cables - Specifications for test methods - Part 3-4 : mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath.) |
| NF C93-537-3-5-2001 | (Communication cables - Specifications for test methods - Part 3-5 : mechanical test methods - Crush resistance of the cable.) |
| NF C93-537-3-6-2001 | (Communication cables - Specifications for test methods - Part 3-6 : mechanical test methods - Impact resistance of the cable.) |
| NF C93-537-3-7-2001 | (Communication cables - Specifications for test methods - Part 3-7 : mechanical test methods - Abrasion resistance of the cable sheath.) |
| NF C93-537-3-8-2001 | (Communication cables - Specifications for test methods - Part 3-8 : mechanical test methods - Abrasion resistance of cable sheath markings.) |
| NF C93-537-3-9-2001 | (Communication cables - Specifications for test methods - Part 3-9 : mechanical test methods - Bending tests.) |
| NF C93-537-4-1-2002 | (Communication cables - Specifications for test methods - Part 4-1 : environmental test methods - General requirements.) |
| NF C93-537-4-11-2002 | (Communication cables - Specifications for test methods - Part 4-11 : environmental test methods - A horizontal integrated fire test method.) |
| NF C93-537-4-14-2003 | (Communication cables - Specifications for test methods - Part 4-14 : environmental test methods - Lightning.) |
| NF C93-537-4-2-2002 | (Communication cables - Specifications for test methods - Part 4-2 : environmental test methods - Water penetration.) |
| NF C93-537-4-6-2002 | (Communiaction cables - Specifications for test methods - Part 4-6 : environmental test methods - Temperature cycling.) |
| NF C93-537-4-9-2002 | (Communication cables - Specifications for test methods - Part 4-9 : environmental test methods - Pneumatic resistance.) |
| NF C93-540-1-1-2002 | (Communication cables - Part 1-1 : general.) |
| NF C93-540-2-20-2002 | (Communication cables - Part 2-20 : common design rules and construction - General.) |
| NF C93-540-2-21-2002 | (Communication cables - Part 2-21 : common design rules and construction - PVC insulation compounds.) |
| NF C93-540-2-22-2002 | (Communication cables - Part 2-22 : common design rules and construction - PVC sheathing compounds.) |
| NF C93-540-2-23-2002 | (Communication cables - Part 2-23 : common design rules and construction - PE insulation.) |
| NF C93-540-2-24-2002 | (Communication cables - Part 2-24 : common design rules and construction - PE sheathing.) |
| NF C93-540-2-25-2002 | (Communication cables - Part 2-25 : common design rules and construction - Polypropylene insulation compounds.) |
| NF C93-540-2-26-2002 | (Communication cables - Part 2-26 : common design rules and construction - Halogen free flame retardant insulation compounds.) |
| NF C93-540-2-27-2002 | (Communication cables - Part 2-27 : common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds.) |
| NF C93-540-2-28-2002 | (Communication cables - Part 2-28 : common design rules and construction - Filling compounds for filled cables.) |
| NF C93-540-2-29-2002 | (Communication cables - Part 2-29 : common design rules and construction - Cross-linked PE insulation compounds.) |
| NF C93-540-2-30-2002 | (Communication cables - Part 2-30 : common design rules and construction - Poly(tetrafluoroethylene-Hexafluoropropylene) (FEP) insulation and sheathing.) |
| NF C93-540-4-1-2002 | (Communication cables - Part 4-1 : general considerations for the use of cables - Environmental conditions and safety aspects.) |
| NF C93-542-1-2001 | (Multi-element metallic cables used in analogue and digital communication and control - Part 1 : generic specification.) |
| NF C93-542-2-1-2001 | (Multi-element metallic cables used in analogue and digital communication and control - Part 2-1 : sectionnal specification for screened cables characterized up to 100 MHz - Horizontal and building bac) |
| NF C93-542-2-2-2001 | (Multi-element metallic cables used in analogue and digital communication and control - Part 2-2 : sectionnal specification for screened cables characterized up to 100 MHz - Work area and patch cord ca) |
| NF C93-542-3-1-2001 | (Multi-element metallic cables used in analogue and digital communication and control - Part 3-1 : sectionnal specification for unscreened cables characterized up to 100 MHz - Horizontal and building b) |
| NF C93-542-3-2-2001 | (Multi-element metallic cables used in analogue and digital communication and control - Part 3-2 : sectional specification for unscreened cables characterized up to 100 MHz - Work area and patch cord c) |
| NF C93-542-4-1-2001 | (Multi-element metallic cables used in analogue and digital communication and control - Part 4-1 : sectionnal specification for screened cables characterized up to 600 MHz - Horizontal and building bac) |
| NF C93-542-4-2-2001 | (Multi-element metallic cables used in analogue and digital communication and control - Part 4-2 : sectionnal specification for screened cables characterized up to 600 MHz - Work area and patch cord ca) |
| NF C93-550-1982 | (Electronic components. RF coaxial cables, with metallic braid. General requirements.) |
| NF C93-551-1977 | (ELECTRONIC COMPONENTS. SEMI RIGID COAXIAL CABLES. GENERAL REQUIREMENTS.) |
| NF C93-557-2001 | (RF connectors, connector cable assemblies and cables - Intermodulation level measurement.) |
| NF C93-560-24-2002 | (Radio-frequency connectors - Part 24 : sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (type F).) |
| NF C93-567-1996 | (Radio-frequency connectors. Part 24 : radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F).) |
| NF C93-578-1996 | (Radio-frequency connectors. Part 25 : two-pole screw (3/4-20 unef) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type twhn).) |
| NF C93-584-1-1999 | (Radio frequency and coaxial cable assemblies - Part 1 : generic specification - General requirements and test methods.) |
| NF C93-584-2-1-1998 | (Radio frequency and coaxial cable assemblies. Part 2-1 : sectional specification for flexible coaxial cable assemblies.) |
| NF C93-584-2-2-2000 | (Radio frequency and coaxial cable assemblies - Part 2-2 : blank detail specification for flexible coaxial cable assemblies.) |
| NF C93-584-2-3-1999 | (Radio frequency and coaxial cable assemblies. Part 2-3 : detail specification for flexible coaxial cable assemblies.) |
| NF C93-584-2-4-1998 | (Radio frequency and coaxial cable assemblies. Part 2-4 : detail specification for cable assemblies for radio and TV receivers (frequency range 0 to 3000 MHz, IEC 60169-2 connectors).) |
| NF C93-584-2-5-1999 | (Radio frequency and coaxial cable assemblies. Part 2-5 : detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 1000 MHz, IEC 60169-2 connectors.) |
| NF C93-584-2-6-1999 | (Radio frequency and coaxial cable assemblies. Part 2-6 : detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 3000 MHz, IEC 60169-24 connectors.) |
| NF C93-584-3-1-2000 | (Radio frequency and coaxial cable assemblies - Part 3-1 : blank detail specification for semi-flexible coaxial cable assemblies.) |
| NF C93-584-3-2-1999 | (Radio frequency and coaxial cable assemblies. Part 3-2 : detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz).) |
| NF C93-584-3-2000 | (Radio frequency and coaxial cable assemblies - Part 4-1 : blank detail specification for semi-rigid coaxial cable assemblies.) |
| NF C93-584-4-1-2000 | (Radio frequency and coaxial cable assemblies - Part 4-1 : blank detail specification for semi-rigid coaxial cable assemblies.) |
| NF C93-584-4-2000 | (Radio frequency and coaxial cable assemblies - Part 3 : selectional specification for semi-flexible coaxial cable assemblies.) |
| NF C93-585-2-2002 | (Radio-frequency cables - Specifications - Part 2 : semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation - Sectional specification.) |
| NF C93-585-3-1999 | (Radio frequency cables. Part 3 : sectional specification for coaxial cables for local area networks.) |
| NF C93-585-3-2-1998 | (Radio frequency cables. Part 3-2 : coaxial cables for digital communication in horizontal floor wiring. Detail specification for coaxial cables with solid dielectric for local area network of 185 m reach and up to 10 Mb/s.) |
| NF C93-585-3-3-1998 | (Radio frequency cables. Part 3-3 : coaxial cables for digital communication in horizontal floor wiring. Detail specification for coaxial cables with foamed dielectric for local area network of 185 m reach and up to 10 Mb/s.) |
| NF C93-587-1-2001 | (Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 - Part 1 : installed cabling.) |
| NF C93-587-1/A1-2003 | (Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 - Part 1 : installed cabling.) |
| NF C93-807-1-1-1998 | (Fibre optic communication subsystem basic test procedures. Part 1-1 : test procedures for general communication subsystems. Transmitter output optical power measurement for single-mode optical fibre cable.) |
| NF C93-811-1987 | (FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF03.) |
| NF C93-812-1987 | (FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF04.) |
| NF C93-813-1987 | (FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF05.) |
| NF C93-828-1997 | (Fibre optic passive components and cable assemblies. Part 1 : capability approval. Generic specification.) |
| NF C93-850-1-1-2002 | (Optical fibre cables - Part 1-1 : generic specification - General.) |
| NF C93-850-1-2-2000 | (Optical fibre cables - Part 1-2 : generic specification - Basic optical cable test procedures.) |
| NF C93-850-2-10-2003 | (Optical fibre cables - Part 2-10 : indoor cables - Family specification for simplex and duplex cables.) |
| NF C93-850-2-20-2003 | (Optical fibre cables - Part 2-20 : indoor cables - Family specification for multi-fibre optical distribution cables.) |
| NF C93-850-2-2003 | (Optical fibre cables - Part 2 : indoor cables - Sectional specification.) |
| NF C93-850-2-30-2003 | (Optical fibre cables - Part 2-30 : indoor cables - Family specification for optical fibre ribbon cables.) |
| NF C93-850-3-2002 | (Optical fibres cables - Part 3 : sectional specification - Outdoor cables.) |
| NF C93-857-1997 | (MATERIAL USED IN TUBES FOR OPTICAL FIBRE CABLES.) |
| NF C93-858-1997 | (DIELECTRIC STRENGTH MEMBER USED IN OPTICAL FIBRE CABLES.) |
| NF C93-859-1-2001 | (Familly Specification : optical telecommunication cables to be used in ducts or direct buried application.) |
| NF C93-859-2-2001 | (Family Specification : optical aerial telecommunication cables.) |
| NF C93-859-3-2003 | (Family specification - Optical fibre cables for indoor applications.) |
| NF C93-859-4-2001 | (Family specification - Single-mode optical fibre cables to be used as underwater cables for lakes and river crossings etc.) |
| NF C93-859-5-2002 | (Single-mode optical fibre cable (duct/direct buried installation).) |
| NF C93-864-1998 | (SECTIONAL SPECIFICATION : CONNECTORS SETS FOR OPTICAL FIBRES AND CABLES. TYPE LSH. (EUROPEAN STANDARD EN 186270).) |
| NF C93-865-1998 | (SECTIONAL SPECIFICATION : CONNECTORS SETS FOR OPTICAL FIBRES AND CABLES. TYPE SC. (EUROPEAN STANDARD EN 186260).) |
| NF C93-900-17-1998 | (Connectors for optical fibres and cables. Part 17 : sectional specification for fibre optic connector. Type F-05 (friction lock).) |
| NF C93-902-35-1998 | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-35 : tests. Cable nutation.) |
| NF C93-902-37-1998 | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-37 : tests. Cable bending for closures.) |
| NF C93-902-4-1997 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-4 : tests. Fibre/cable retention.) |
| NF C98-098-1-1995 | (CUTOMER PREMISES CABLING FOR INFORMATION TECHNOLOGY. PART 1 : ISDN BASIC ACCESS. (EUROPEAN STANDARD EN 50 098-1).) |
| NF C98-098-1-2003 | (Customer premises cabling for Information Technology - Part 1 : ISDN basic access.) |
| NF C98-098-1/A1-2003 | (Customer premises cabling for Information Technology - Part 1 : ISDN basic access.) |
| NF C98-098-2-1997 | (Customer premises cabling for information technology. Part 2 : 2048 kbit/s ISDN primary access and leased line network interface.) |
| NF E29-836-1997 | (Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere.) |
| NF F00-026-1981 | (Railway material in general. Standard stirrup-type cable clamp.) |
| NF F07-024-1992 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. DETERMINATION AND MEASUREMENT OF SCREENING FACTOR WITH A FREQUENCY OF 50 HZ OF RAILWAY SIGNALLING AND TELECOMMUNICATION CABLES.) |
| NF F55-024-1975 | (FIXED RAILWAY INSTALLATIONS. SIGNALLING. JUNCTION BOXES. ASSEMBLIES,CASINGS AND COVERS.) |
| NF F55-025-1975 | (FIXED RAILWAY INSTALLATIONS. SIGNALLING. JUNCTION BOXES AND TEE JOINTS. FLANGES.) |
| NF F55-026-1975 | (FIXED RAILWAY INSTALLATIONS. SIGNALLING. JUNCTION BOXES. PROTECTIVE SHEATHS.) |
| NF F55-050-1976 | (FIXED RAILWAY INSTALLATIONS. SYSTEMS FOR LIGHT GAUGE ELECTRIC CABLE CONDUITS SET IN REINFORCED CONCRETE.) |
| NF F55-051-1976 | (FIXED RAILWAY INSTALLATIONS. LIGHT GAUGE CONDUIT SET IN REINFORCED CONCRETE AND PVC CHANNELLING.) |
| NF F55-0511-1978 | () |
| NF F55-054-1978 | (FIXED RAILWAY INSTALLATIONS. UNDERGROUND ELECTRIC CABLES. DUCTING FOR HIGH-TENSION CABLES.) |
| NF F55-071-1990 | (RAILWAY FIXED EQUIPMENT. PREFABRICATED CABLE PITS,IN REINFORCED CONCRETE.) |
| NF F55-100-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC CABLES.) |
| NF F55-101-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC CABLES. STRAIGHT UNITS.) |
| NF F55-102-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC LIGHTING CABLES. COVERS FOR STRAIGHT UNITS.) |
| NF F55-103-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC LIGHTING CABLES. 90 DEGREES ELBOWS.) |
| NF F55-104-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC LIGHTING CABLES. COVERS FOR 90 DEGREES ELBOWS.) |
| NF F55-105-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC LIGHTING CABLES. VERTICAL BENDS.) |
| NF F55-106-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC LIGHTING CABLES. COVERS FOR VERTICAL BENDS.) |
| NF F55-107-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC LIGHTING CABLES. STIRRUPS FOR SECURING VERTICAL BEND COVERS.) |
| NF F55-110-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC TRACTION CABLES. STRAIGHT UNITS.) |
| NF F55-111-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC TRACTION CABLES. COVERS FOR STRAIGHT UNITS.) |
| NF F55-112-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC TRACTION CABLES. 90 DEGREES ELBOWS.) |
| NF F55-113-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC TRACTION CABLES. COVERS FOR 90 DEGREES ELBOWS.) |
| NF F55-114-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC TRACTION CABLES. VERTICAL BENDS.) |
| NF F55-115-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC TRACTION CABLES. COVERS FOR VERTICAL BENDS.) |
| NF F55-116-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC TRACTION CABLES. STIRRUPS FOR SECURING VERTICAL BEND COVERS.) |
| NF F55-120-1975 | (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC TRACTION CABLES. METAL FASTENERS FOR DUCTING.) |
| NF F55-617-1994 | (RAILWAY FIXED EQUIPMENT. ARMOURED ELECTRICAL CABLES FOR SPEED CHECK CIRCUITS USING BEACONS.) |
| NF F55-624-1991 | (FIXED RAILWAY EQUIPMENT. HALOGEN FREE CABLES FOR TELECOMMUNICATIONS FOR LOCAL CUSTOMS USED IN UNDERGROUND RAILWAY NETSWORKS.) |
| NF F55-625-1993 | (RAILWAY FIXED EQUIPMENTS. HALOGEN FREE LOW VOLTAGE POWER CORDS AND CABLES USED TO UNDERGROUND RAILWAY NETWORK FIXED EQUIPMENT, CABLES FOR ELECTRIC TRACTION OR LIGHTING.) |
| NF F55-633-1995 | (RAILWAY FIXED EQUIPMENT. TELECOMMAND AND TELETRANSMISSION CABLES USED TO URBAN RAILWAY NETWORK.) |
| NF F55-675-1994 | (RAILWAY FIXED EQUIPMENT. POWER CABLES WITH SYNTHETIC INSULATION, WITH RATED VOLTAGE UO/U (UM) : 3,2/3,2 (3,6) KV, USED FOR SUPPLYING SIGNALLING INSTALLATIONS.) |
| NF F55-698-1994 | (FIXED RAILWAY EQUIPMENT. ELECTRIC SIGNALLING. CABLES WITH PAIRS OR QUADS OF CONDUCTORS FOR SIGNALLING CIRCUITS.) |
| NF F56-131-1991 | (FIXED RAILWAY EQUIPMENT. CONDUITS FOR PROTECTION OF UNDERGROUND ELECTRICAL INSTALLATIONS,WITHOUT CONCRETE CASING.) |
| NF F56-156-1979 | (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. GALVANIZED ROUND HEAD BOLTS,FINISH G.) |
| NF F56-160-1985 | (FIXED RAILWAY EQUIPMENT. MATERIAL FOR TELECOMMUNICATION AND SIGNALLING OVERHEAD LINES-STAY-ROPE.) |
| NF F61-012-1998 | (Railway rolling stock. Selection criteria for electrical conductors and cables.) |
| NF F61-013-1996 | (RAILWAY ROLLING STOCK. INSTALLATION AND FIXING OF ELECTRICALS WIVES AND CABLES.) |
| NF F61-014-1998 | (Railway rolling stock. Electrical connecting of braided wire and shielded cable.) |
| NF F61-343-2003 | (Railway applications - Rolling stock - Rules for installation of cabling.) |
| NF F61-349-1990 | (RAILWAY ROLLING STOCK. CABLE CLAMP COLLARS FOR ELECTRIC CONDUCTORS AND CABLES.) |
| NF F63-264-1-2002 | (Railways applications - Railway rolling stock cables having special fire performance - Standard wall - Part 1 : general requirements.) |
| NF F63-264-2-2002 | (Railways applications - Railway rolling stock cables having special fire performance - Standard wall - Part 2 : single core cables.) |
| NF F63-264-3-2002 | (Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Part 3 : multicore cables.) |
| NF F63-295-1992 | (RAILWAY ROLLING STOCK. CABLES FOR ROLLING STOCK. INSULATED CABLES AND FLEXIBLE CORDS WITH RESPECT TO BEHAVIOUR IMPROVED TO FIRE.) |
| NF F63-296-1992 | (RAILWAY ROLLING STOCK. INSULATED CABLES AND FLEXIBLES CORDS GAS OIL RESISTANT.) |
| NF F63-305-2002 | (Railway applications - Railway rolling stock cables having special fire performance - Test methods.) |
| NF F63-306-1-2003 | (Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1 : general requirements.) |
| NF F63-306-2-2003 | (Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2 : single core cables.) |
| NF F63-306-3-2003 | (Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3 : single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed.) |
| NF F63-306-4-2003 | (Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4 : multicore and multipair cables standard wall sheathed.) |
| NF F63-307-1989 | (ROLLING STOCK. CONDUCTORS AND CABLES USED FOR THE CABLING OF SHEATHED ELECTRIC AND ELECTRONIC EQUIPMENT.) |
| NF F63-436-1993 | (RAILWAY ROLLING STOCK. FLEXIBLE SHEATHS FOR THE PROTECTION OF ELECTRICAL CONDUCTORS AND CABLES.) |
| NF F63-808-1992 | (Railway rolling stock. Halogen free, electrical conductors and cables with thin insulation and protective layers.) |
| NF F63-809-1992 | (RAILWAY ROLLING STOCK. LOW HALOGEN ELECTRICAL CONDUCTORS AND CABLES WITH THIN INSULATION AND PROTECTIVE LAYERS.) |
| NF F63-826-1990 | (RAILWAY ROLLING STOCK. HALOGEN FREE ELECTRICAL CONDUCTORS AND CABLES.) |
| NF F74-001-2-1992 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTRONIC AND MICROPROCESSOR SIGNALLING AND AID EQUIPMENT. PART 2 : CONSTRUCTION (MOUNTING, CABLING, MARKING).) |
| NF F74-101-0-1993 | (RAILWAY FIXED EQUIPMENTS AND ROLLING STOCK. SAFETY CABLE WORK AND CONNECTION. PART 0 : GENERAL.) |
| NF F74-101-1-1993 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 1 : SAFE CRITERION.) |
| NF F74-101-2-1995 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 2 : TECHNIQUE AND TECHNOLOGY CHOICES. ENVIRONMENT CRITERION. GUIDE.) |
| NF F74-101-3-1996 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 3 : MAKING IN FACTORY - QUALITY SUPERVISING IN FACTORY AND ON PLACE. SETTING UP IN POSITION. MAINTENABILITY CRITERION. GUIDE.) |
| NF F74-101-4-1993 | (RAILWAY FIXED EQUIPMENTS AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 4 : MECHANICAL CRITERION.) |
| NF F74-101-5-1993 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 5 : ELECTRICAL CRITERION.) |
| NF J71-120-1948 | (SHIPBUILDING. CABLE ENDS FOR ARMOURED ELECTRIC CABLES.) |
| NF L09-501-1978 | (STANDARDIZED ELECTRICAL CABLES. DESIGNATION AND REFERENCE COMPOSITION.) |
| NF L09-502-1978 | (STANDARDIZED ELECTRICAL CABLES. CODE FOR CATEGORIES OF SIZE.) |
| NF L09-503-1978 | (STANDARDIZED ELECTRICAL CABLES. CODE FOR OPERATING TEMPERATURES AND FOR TYPE OF CONDUCTOR COATING.) |
| NF L09-504-1978 | (STANDARDIZED ELECTRICAL CABLES. CODE FOR TYPE OF INSULATING SHEATH.) |
| NF L31-301-1978 | (BALL BEARINGS FOR CONTROL CABLE PULLEYS. DIMENSIONS AND LOADS.) |
| NF L50-050-1996 | (AEROSPACE SERIES. TESTING OF AIRCRAFT WIRING. (EUROPEAN STANDARD EN 2283).) |
| NF L52-120-1978 | (GENERAL PURPOSE ELECTRIC CABLES WITH COPPER CORE.) |
| NF L52-121-1978 | (GENERAL PURPOSE ELECTRIC CABLES WITH COPPER CONDUCTOR.) |
| NF L52-125-1978 | (HEAT-RESISTING ELECTRIC CABLES WITH COPPER CORE.) |
| NF L52-126-1978 | (Heat-resisting electric cables with copper conductor.) |
| NF L52-127-1978 | (Fire-resisting electric cables.) |
| NF L52-128-1978 | (Fire-resisting electric cables with copper conductor.) |
| NF L52-230-2001 | (Aerospace series - Copper or copper alloy conductors for electrical cables - Product standard.) |
| NF L52-250-100-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100 : general.) |
| NF L52-250-201-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201 : visual examination.) |
| NF L52-250-202-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202 : mass.) |
| NF L52-250-301-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301 : ohmic resistance per unit length.) |
| NF L52-250-302-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 302 : voltage proof test.) |
| NF L52-250-303-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303 : insulation resistance.) |
| NF L52-250-304-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304 : surface resistance.) |
| NF L52-250-305-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305 : overload resistance.) |
| NF L52-250-401-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 401 : accelerated ageing.) |
| NF L52-250-402-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402 : shrinkage and delamination.) |
| NF L52-250-403-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403 : delamination and blocking.) |
| NF L52-250-404-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404 : thermal shock.) |
| NF L52-250-405-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405 : bending at ambient temperature.) |
| NF L52-250-406-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406 : cold bend test.) |
| NF L52-250-407-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407 : flammability.) |
| NF L52-250-409-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409 : air-excluded ageing.) |
| NF L52-250-410-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410 : thermal endurance.) |
| NF L52-250-412-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412 : humidity resistance.) |
| NF L52-250-413-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413 : wrap back test.) |
| NF L52-250-501-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501 : dynamic out-through.) |
| NF L52-250-502-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502 : notch propagation.) |
| NF L52-250-503-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503 : scrape abrasion.) |
| NF L52-250-504-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504 : torsion.) |
| NF L52-250-505-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505 : tensile test on conductors and strands.) |
| NF L52-250-506-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506 : plating continuity.) |
| NF L52-250-507-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507 : adherence of plating.) |
| NF L52-250-508-2003 | (Aerospace series - Cables, electrical, aircraft use - Test mehtods - Part 508 : plating thickness.) |
| NF L52-250-509-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509 : solderability.) |
| NF L52-250-510-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510 : tensile strength and elongation of extruded insulation, sheath and jacket material.) |
| NF L52-250-511-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511 : cable-to-cable abrasion.) |
| NF L52-250-512-2003 | (Aerospace series - Cables, electrical, aircarft use - Test methods - Part 512 : flexure endurance.) |
| NF L52-250-603-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603 : resistance to wet arc tracking.) |
| NF L52-250-604-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604 : resistance to dry arc propagation.) |
| NF L52-250-605-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605 : wet short circuit test.) |
| NF L52-250-701-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701 : strippability and adherence of insulation to the conductor.) |
| NF L52-250-702-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702 : screen pushback capability.) |
| NF L52-250-703-2002 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703 : permanence of manufacturer's marking.) |
| NF L52-250-704-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704 : flexibility.) |
| NF L52-250-705-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705 : contrast measurement.) |
| NF L52-250-801-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 801 : capacitance per unit length.) |
| NF L52-250-802-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802 : capacitance unbalance.) |
| NF L52-250-803-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803 : capacitance variation.) |
| NF L52-250-804-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 804 : velocity of propagation.) |
| NF L52-250-805-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805 : characteristic impedance.) |
| NF L52-250-806-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806 : attenuation.) |
| NF L52-250-807-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807 : transfer impedance.) |
| NF L52-250-808-2003 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808 : cross-talk.) |
| NF L53-130-1967 | (COPPER CRIMPING TERMINALS FOR ELECTRIC CABLES AND METALLISING BRAID.) |
| NF L53-140-1987 | (Aircraft equipment. Ring terminal ends for thermocouple extension cables. Dimensions.) |
| NF L53-145-1987 | (Aircraft equipment. Butt connectors for thermocouple extension cables. Dimensions.) |
| NF L54-002-092-2002 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 610 : optical elements - Effectiveness of cable attachment - Cable pulling.) |
| NF L54-002-093-2002 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 611 : optical elements - Effectiveness of cable attachment - Cable torsion.) |
| NF L54-002-094-2002 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 612 : optical elements - Effectiveness of cable attachment - Cable axial compression.) |
| NF L54-002-097-2002 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 615 : optical elements - Connection integrity at temperature.) |
| NF L86-360-1954 | (ARMOURED IGNITION CABLE ENDS FOR PISTON ENGINED AIRCRAFT.) |
| NF L93-810-1967 | (END PROTECTORS FOR IGNITION CABLE. (RECH.).) |
| NF M08-018-1996 | (Petroleum liquids and gases. Fidelity and security of dynamic measurement. Cabled transmission of electric and/or electronic pulsed data.) |
| NF M87-202-1987 | (Petroleum industry. Instrumentation cables. Specifications.) |
| NF P52-302-1-1993 | (DTU 65-7. BUILDING WORKS. EXECUTION OF FLOOR HEATING THROUGH ELECTRIC CABLES SET IN CONCRETE. PART 1 : TECHNICAL SPECIFICATIONS.) |
| NF P52-302-2-1993 | (DTU 65-7. BUILDING WORKS. PRIVATE CONTRACTS. EXECUTION OF FLOOR HEATING THROUGH ELECTRIC CABLES SET IN CONCRETE. PART 2 : SPECIAL CLAUSES.) |
| NF Q13-001-1980 | (PAPER. CHARACTERISTICS OF PAPER FOR INSULATION OF ELECTRICAL CABLES.) |
| NF R13-323-1998 | (Road vehicles. Unscreened high-tension ignition cable assemblies. General requirements and test methods.) |
| NF R13-417-1992 | (Road vehicles. Unscreened high-tension ignition cables. Part 1 : dimensions, general requirements and test methods.) |
| NF R13-418-1986 | (Road vehicles. Unscreened high-tension ignition cables. Cable classes, types, applicable tests and special requirements.) |
| NF R13-419-1-2000 | (Road vehicles - Multicore connecting cables - Part 1 : test methods and requirements for basic performance sheathed cables.) |
| NF R13-419-2-2000 | (Road vehicles - Multicore connecting cables - Part 2 : test methods and requirements for high performance sheathed cables.) |
| NF R13-419-3-2000 | (Road vehicles - Multicore connecting cables - Part 3 : construction, dimensions and marking of unscreened sheathed low-voltage cables.) |
| NF R13-421-2003 | (Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements.) |
| NF T54-080-2002 | (Plastics warning devices for underground cables and pipelines with visual characteristics.) |
| NF X51-001-1977 | (CERTIFICATION AND MARKING OF CABLES,CHAINS AND HOOKS. (ANNEXE TO THE DIRECTIVE OF 13TH APRIL 1976 OF THE COMMISSION OF THE EUROPEAN COMMUNITIES).) |
| NF Z86-429-1996 | (DIGITAL BROADCASTING SYSTEMS FOR TELEVISION, SOUND AND DATA SERVICES. FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR CABLE SYSTEMS. (EUROPEAN TELECOMMUNICATION STANDARD ETS 300429).) |
| UTE C33-223U-1999 | (Insulated cables and their accessories for power systems - Cross-linked polyethylene cables of rated voltage 12/20 (24) kV for distribution networks.) |
| XP C32-330-1996 | (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. HEATING EQUIPMENT BY MEANS OF HEATING CABLES, WITH METALLIC COVERING FOR EMBEDDING INTO WALLS OF BUILDINGS.) |