HOMETECHNICAL LIB

 

 

ANSI cable standards

 

ANSI cable standards

EN |  BS |  DIN |  IEC |  IEEE  |  NF  |  ANSI |  JIS  |  GB |  ISO | 
Code Name

ANSI E1.16-2002

Entertainment Technology - Configuration Standard for Metal-Halide Ballast Power Cables

ANSI E1.27-1-2006

Entertainment Technology - Standard for Portable Control Cables for use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products

ANSI J-STD-042-2002

Emergency Alert Message for Cable

ANSI T1.307-2003

Telecommunications - Fire Resistance Criteria - Ignitability Requirements for Equipment Assemblies and Fire Spread Requirements for Wire and Cable

ANSI/AAMI EC53-1995

ECG Cables and Wires

ANSI/AAMI EC53A-1998

ECG Cables and Wires

ANSI/API SPEC17E-2003

Specification for Subsea Umbilicals

ANSI/ASTM A523-1996

Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

ANSI/ASTM D1047-1995

Specification for Poly(Vinyl Cholride) Jacket for Wire and Cable (10.01)

ANSI/ASTM D1351-2002

Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable

ANSI/ASTM D1523-2000

Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operations (10.01)

ANSI/ASTM D2219-2002

Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation, Specification for (10.01)

ANSI/ASTM D2220-2002

Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation, Specification for (10.01)

ANSI/ASTM D2308-2002

Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable

ANSI/ASTM D2633-2002

Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable

ANSI/ASTM D2655-2000

Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V

ANSI/ASTM D2656-2000

Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35V (10.02)

ANSI/ASTM D2768-1995

Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable (10.02)

ANSI/ASTM D2770-2001

Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable

ANSI/ASTM D2802-2003

Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable

ANSI/ASTM D3485-2002

Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

ANSI/ASTM D3554-2001

Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable

ANSI/ASTM D3555-2001

Specification for Track-Resistant Black Crosslinked Thermosetting Polyethylene Insulation for Wire and Cable

ANSI/ASTM D4244-1995

Specification for General-Purpose, Heavy-Duty and Extra-Heavy Duty Acrylonitrile-Butadiene Polyvinyl Chloride (NBR PVC) Jackets for Wire and Cable (10.02)

ANSI/ASTM D4245-2002

Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable 90oC Dry/75oC Wet Operation

ANSI/ASTM D4246-2002

Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90oC Operation

ANSI/ASTM D4313-2003

Specification for General Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene Jackets for Wire and Cable

ANSI/ASTM D4314-1999

Specification for General Purpose Heavy-Duty and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene Jackets for Wire and Cable (10.02)

ANSI/ASTM D4363-1998

Specification for Thermoplastic Chlorinated Polyethylene Jacket for Wire and Cable

ANSI/ASTM D4565-1999

Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02)

ANSI/ASTM D4566-1998

Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02)

ANSI/ASTM D4568-1999

Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials (10.02)

ANSI/ASTM D470-2005

Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01)

ANSI/ASTM D4730-2002

Specification for Flooding Compounds for Telecommunications Wire and Cable

ANSI/ASTM D4731-2002

Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable

ANSI/ASTM D4732-2002

Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable

ANSI/ASTM D4872-1999

Test Method for Dielectric Testing of Wire and Cable Filling Compounds

ANSI/ASTM D5424-2005

Test Method for Smoke Obscuration Caused by Burning Cables in a Vertical Configuration (10.02)

ANSI/ASTM D5537-2003

Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ANSI/ASTM D6070-2002

Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

ANSI/ASTM D6096-2002

Specification for Poly(vinyl Chloride) Insulation for Wire and Cable, 90 C Operation

ANSI/ASTM D6113-2003

Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

ANSI/ASTM D866-1999

Specification for Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable (10.01)

ANSI/ASTM F1835-1997

Guide for Cable Splicing Installations

ANSI/ASTM F1837M-1997

Specification for Heat-Shrink Cable Entry Seals (Metric)

ANSI/ASTM F1883-2003

Practice for Selection of Wire and Cable Size, in AWG or Metric Units

ANSI/CEA 2030-2005

Multi Room Audio Cabling Standard

ANSI/CEA 600.33-1997

Coax Cable Physical Layer and Medium Specification

ANSI/EIA 364-101-2000

Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems

ANSI/EIA 364-102-1998

Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems

ANSI/EIA 364-107-2000

Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems

ANSI/EIA 364-108-2000

Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems

ANSI/EIA 364-38B-1999

Electric Connectors - Cable Pull-Out Test

ANSI/EIA 364-41A-1984

Electric Connectors - Circular Jacket Cable Flexing Test Procedure

ANSI/EIA 364-41C-1999

TP-41 Cable Flexing Test Procedure for Electrical Connectors

ANSI/EIA 364-43B-2000

Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors

ANSI/EIA 403-A-1990

Precision Coaxial Connectors for CATV Application (75 Ohms)

ANSI/EIA 429-1976

Connectors, Electrical Flat Cable Type, General Specification for

ANSI/EIA 600.33-1997

Coax Cable Physical Layer and Medium Specification

ANSI/EIA 700AOAE-2000

Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2)

ANSI/EIA 700AOAF-2000

Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)

ANSI/EIA-364-101-2000

Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems

ANSI/EIA-364-102-1998

Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems

ANSI/EIA-364-103-1998

Propogation Delay Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems

ANSI/EIA-364-107-2000

Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems

ANSI/EIA-364-108-2000

Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems

ANSI/EIA-364-38B-1999

Cable Pull-Out Test Procedure for Electrical Connectors

ANSI/EIA-364-41C-1999

TP-41 Cable Flexing Test Procedure for Electrical Connectors

ANSI/EIA-364-43B-2000

Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors

ANSI/EIA-700AOAE-2000

Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2)

ANSI/EIA-700AOAF-2000

Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)

ANSI/EIA/TIA -455-104A-1993

Fiber Optic Cable Cyclic Flexing Test

ANSI/EIA/TIA 455-6B-1992

Cable Retention Test Procedure for Fiber Optic Cable Interconnecting Devices

ANSI/EIA/TIA-455-37-1993

Fiber Optic Cable Bend Test, Low and High Temperature

ANSI/ICEA P-54-440-2002

Ampacities of Cables Installed in Cable Trays

ANSI/ICEA S-101-699-2001

Category 3 Individually Unshielded Twisted Pair Indoor Cable For Use In General Purpose Non-LAN Telecommunications Wiring Systems Technical Requirements

ANSI/ICEA S-103-701-2004

Riser Cable

ANSI/ICEA S-105-692-2004

600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables

ANSI/ICEA S-108-720-2004

Standard for Extruded Insulation Power Cables Rated Above 46 through 345 KV

ANSI/ICEA S-532-1973

Control, Thermocouple Extension and Instrumentation Cables

ANSI/ICEA S-70-547-2000

Weather-Resistant Polyolefin-Covered Wire and Cable

ANSI/ICEA S-76-474-2005

Neutral-Supported Power Cable Assemblies with Weather-Resistant Extruded Insulation Rated 600 Volts

ANSI/ICEA S-80-576-2002

Category 1 & 2 Individually Unshielded Twisted Pair Indoor Cables (With or Without an Overall Shield) for Use in Communications Wiring Systems Technical Requirements

ANSI/ICEA S-81-570-2005

Standard for 600 Volt Cables of Ruggedized Design

ANSI/ICEA S-84-608-2002

Telecommunications Cable Filled, Polyolefin Insulated, Copper Conductor - Technical Requirements

ANSI/ICEA S-85-625-2002

Aircore, Polyolefin Insulated, Copper Conductor Telecommunications Cable - Technical Requirements

ANSI/ICEA S-86-634-2004

Telecommunications Cable Buried Distribution and Service Wire - Technical Requirements

ANSI/ICEA S-87-640-1999

Optical Fiber Outside Plant Communications Cable

ANSI/ICEA S-90-661-2002

Individually Unshielded Twisted Pair Indoor Cables for Use In Communication Wiring Systems - Technical Requirements

ANSI/ICEA S-94-649-2005

Concentric Neutral Cables Rated 5,000-46,000 Volts

ANSI/ICEA S-97-682-2000

Utility Shielded Power Cables Rated 5000 - 46,000 Volts

ANSI/ICEA S-98-688-1997

Broadband Twisted Pair Cable Aircore, Polyolefin Insulated, Copper Conductor

ANSI/ICEA S-99-689-1997

Broadband Twisted Pair Cable Filled, Polyolefin Insulated, Copper Conductor

ANSI/ICEA T-26-465-2000

Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test

ANSI/IEEE 1017-2004

Recommended Practice for Field Testing Electric Submersible Pump Cable

ANSI/IEEE 1018-2004

Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation

ANSI/IEEE 1019-2004

Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation

ANSI/IEEE 1073.3.2-2000

Medical Device Communications - Transport Profile - IrDA Based - Cable Connected

ANSI/IEEE 1120-2004

Guide to the Factors to Be Considered in Planning, Design, and Installation of Submarine Power and Communication Cable

ANSI/IEEE 1143-1994

Guide on Shielding Practice for Low Voltage Cables

ANSI/IEEE 1185-1994

Guide for Installation Methods for Generating Station Cables

ANSI/IEEE 1202-1991

Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies

ANSI/IEEE 1210-2004

Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable

ANSI/IEEE 1235-2000

Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts

ANSI/IEEE 1242-1999

Guide for Specifying and Selecting Power, Control and Special Purpose Cable for Petroleum and Chemical Plants

ANSI/IEEE 1299/C62.22.1-1996

Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems

ANSI/IEEE 1300-1997

Guide for Cable Connections for Gas Insulated Substations

ANSI/IEEE 1425-2001

Guide for the Evaluation of the Remaining Life of Impregnated Paper Insulated Transmission Cable Systems

ANSI/IEEE 1511-2004

Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV

ANSI/IEEE 383-2003

Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations

ANSI/IEEE 400-2002

Direct Voltage Tests on Power Cables in the Field, Guide for Making

ANSI/IEEE 400.2-2004

Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)

ANSI/IEEE 404-2000

Cable Joints for Use with Extruded Dielectric Cable Rated 5 000 - 138 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2 500-500 000 V

ANSI/IEEE 48-1996

Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations

ANSI/IEEE 515-2004

Cables, Heating-Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications, Recommended Practice for

ANSI/IEEE 525-1993

Design and Installation of Cable Systems in Substations

ANSI/IEEE 576-2000

Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications

ANSI/IEEE 628-2001

Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations, Criteria for the Design, Installation, and Qualification of

ANSI/IEEE 634-2004

Standard for Cable Penetration Fire Stop Qualification Test

ANSI/IEEE 635-2003

Guide for Selection and Design of Aluminum Sheaths for Power Cables

ANSI/IEEE 690-2004

Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations

ANSI/IEEE 835-1994

Power Cable Ampacity Tables

ANSI/IEEE 848-1996

Standard Procedure for the Determination of the Ampacity Derating of Fire Protected Cables

ANSI/IEEE C37.20.1a-2005

Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections

ANSI/IPC WHMA-A-620-2002

Requirements and Acceptance for Cable and Wire Harness Asssemblies

ANSI/NECA 104-2006

Recommended Practice for Installing Aluminum Building Wire and Cable

ANSI/NECA 120-2005

Standard for Installing Armored Cable (Type AC) and Metal Clad Cable (Type MC)

ANSI/NECA 600-2003

Recommended Practice for Installing Medium Voltage Cable

ANSI/NEMA FB-1-2003

Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit and Cable Assemblies

ANSI/NEMA VE1-2003

Metal Cable Tray Systems

ANSI/NEMA VE2-2000

Metal Cable Tray Installation Guidelines

ANSI/NEMA WC27500-2000

Aerospace and Industrial Electric Cable

ANSI/NEMA WC53-2000

Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test

ANSI/NEMA WC57-2004

Control, Thermocouple Extension and Instrumentation Cables

ANSI/NEMA WC63.2-1996

Performance Standard for Coaxial Premise Data Communications Cables

ANSI/NEMA WC66-2001

Performance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair Cables

ANSI/NEMA WC70-1999

Nonshielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

ANSI/NEMA WC71-1999

Nonshielded Cables Rated 2001-5000 Volts for Use in the Distribution of Electric Energy

ANSI/NEMA WC74-2000

5-46kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy

ANSI/NFPA 262-2002

Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces

ANSI/SAE J1067-1998

Seven-Conductor Cable

ANSI/SAE J1494-1997

Battery Booster Cables

ANSI/SAE J2394-1998

Seven-Conductor Cable for ABS Power

ANSI/SAE J560-1998

Seven Conductor Electrical Connector for Truck-Trailer Jumper Cables

ANSI/SCTE 03-2003

Test Method for Coaxial Cable Structural Return Loss

ANSI/SCTE 10-2001

Test Method for Flexible Coaxial Cable Impact Test

ANSI/SCTE 100-2004

Specification for 75 Ohm Smooth Aluminum Subscriber Access Cable

ANSI/SCTE 102-2005

Cable Retention Force Testing of Trunk & Distribution Connectors

ANSI/SCTE 103-2004

Test Method for DC Contact Resistance, Drop cable to F-Connectors and F81 Barrels

ANSI/SCTE 105-2005

Uni-Directional Receiving Device Standard for Digital Cable

ANSI/SCTE 107-2005

Embedded Cable Modem Device Specification

ANSI/SCTE 11-2001

Test Method for Aerial Cable Corrosion Protection Flow

ANSI/SCTE 12-2001

Center Conductor Bond to Dielectric for Trunk, Feeder and Distribution Coaxial Cables

ANSI/SCTE 13-2001

Dielectric Air Leakage Test Method For Trunk, Feeder and Distribution Coaxial Cable

ANSI/SCTE 15-2002

Specification for Trunk, Feeder, and Distribution Coaxial Cable

ANSI/SCTE 21-2002

Carriage of National Television System Committee (NTSC) Vertical Blinking Interval (VBI) Data in Cable Digital Transport Streams

ANSI/SCTE 24-18-2004

IPCablecom CMS to CMS Signaling

ANSI/SCTE 24-20-2005

Requirements for Preferential Telecommunications over IPCablecom Networks

ANSI/SCTE 25-1-2002

Hybrid Fiber/Coax Outside Plant Status Monitoring - Physical (PHY) Layer

ANSI/SCTE 25-2-2002

Hybrid Fiber/Coax Outside Plant Status Monitoring - Media Access Control (MAC) Layer

ANSI/SCTE 25-3-2005

Hybrid Fiber/Coax Outside Plant Status Monitoring Part 3: - PS to T Interface SCTE Subcommittee Code: HMS 022

ANSI/SCTE 25-4-2002

Hybrid Fiber/Coax Outside Plant Status Monitoring Part 4: HMS Power Supply to Transponder Interface Acceptance Test

ANSI/SCTE 27-2003

Subtitling Methods for Broadcast Cable

ANSI/SCTE 33-2002

Diameter of Drop Cable

ANSI/SCTE 35-2004

Digital Program Insertion Cueing Message for Cable

ANSI/SCTE 37-2003

Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ROOT Management Information Base (MIB) Definition

ANSI/SCTE 38-2-2005

Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-ALARMS-MIB Management Information Base (MIB)

ANSI/SCTE 38-3-2002

Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-COMMON-MIB Management Information Base (MIB)

ANSI/SCTE 38-4-2002

Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-PS-MIB Management Information Base (MIB)

ANSI/SCTE 38-5-2002

Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-FIBERNODE-MIB Management Information Base

ANSI/SCTE 38-7-2002

Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-Transponder Interface Bus (TIB)-MIB Management Information Base (MIB) Definition

ANSI/SCTE 38-8-2002

Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-DOWNLOAD-MIB Management Information Base (MIB) Definition

ANSI/SCTE 39-2002

Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables

ANSI/SCTE 40-2004

Digital Cable Network Interface Specification

ANSI/SCTE 48-2-2003

Test Procedure for Measuring Relative Shielding Properties of Active and Passive Coaxial Cable Devices Using H-P Magnetic Close Field Probe

ANSI/SCTE 48-3-2004

Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell

ANSI/SCTE 50-2002

Test Procedure for Measuring Regularity of Impendance of Coaxial Cable

ANSI/SCTE 51-2002

Test Method for Determining Drop Cable Braid Coverage

ANSI/SCTE 57-2003

System Information for Satellite Distribution of Digital Television for Cable and MMDS

ANSI/SCTE 66-2003

Test Method for Coaxial Cable Impedance

ANSI/SCTE 71-2003

Specification for Braided, 75 ohm, Coaxial, Multi-Purpose Cable

ANSI/SCTE 72-2002

Test Method for Axial Load Temperature Cycling of Drop Cable/Connector Interface

ANSI/SCTE 73-2002

Test Method for Insertion Force of Connector to Drop Cable Interface

ANSI/SCTE 74-2003

Specification for Braided 75 Ohm Flexible RF Coaxial Drop Cable

ANSI/SCTE 87-1-2003

Graphic Symbols for Cable Telecommunications - Part 1: HFC Symbols

ANSI/SCTE 89-1-2004

IPCable2Home Standard Part 1: Cable Home Networking 1.0

ANSI/SCTE 89-2-2005

IPCable2Home Standard Part 2 - Cable Home Networking 1.1

ANSI/SCTE 96-2003

Cable Telecommunications Testing Guidelines

ANSI/SCTE 97-2004

Metadata Requirements for Video-On-Demand in Cable Networks

ANSI/SCTE 99-2004

Test Method For Axial Pull Connector/Drop Cable

ANSI/SCTE TP007-1998

Test Method for Coaxial Cable Structural Return Loss

ANSI/SMPTE 276M-1995

Television - Transmission of AES/EBU Digital Audio Signals Over Coaxial Cable

ANSI/TIA-455-162A-1999

Fiber Optic Cable Temperature-Humidity Cycling

ANSI/TIA-455-171-A-2001

Attenuation by Substitution Measurement for Short-Length Multimode Graded-Index and Single Mode Optical Fiber Cable Assemblies

ANSI/TIA-455-1B-1998

Cable Flexing for Fiber Optic Interconnecting Devices

ANSI/TIA-455-41A-1993

Compressive Loading Resistance of Fiber Optic Cable

ANSI/TIA-455-80-C-2003

Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power

ANSI/TIA-455-81-B-2000

Compound Flow (Drip) Test for Filled Fiber Optic Cable

ANSI/TIA-455-84B-1992

Jacket Self-Adhesion (Blocking) for Fiber Optic Cable

ANSI/TIA-455-87B-1993

Knot Test for Fiber Optic Cable

ANSI/TIA-455-89B-1998

Jacket Elongation and Tensile Strength for Fiber Optic Cable

ANSI/TIA-568 -B.2-9-200x-2005

Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures

ANSI/TIA-568-B-3-1-2002

Optical Fiber Cabling Components Standard - Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables

ANSI/TIA-568-B-3-2000

Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling

ANSI/TIA-568-B.1-1-2001

Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius

ANSI/TIA-568-B.1-2-2003

Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling

ANSI/TIA-568-B.1-2001

Commercial Building Telecommunications Cabling Standard

ANSI/TIA-568-B.1-3-2003

Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type

ANSI/TIA-568-B.1-4-2003

Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber

ANSI/TIA-568-B.1-5-2004

Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 5 - Telecommunications Cabling for Telecommunications Enclosures

ANSI/TIA-568-B.2-1-2002

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling

ANSI/TIA-568-B.2-11-2005

Commercial Building Telecommunications Cabling Standard - Part2: Balanced Twisted-Pair Cabling Components - Addendum 11: Specification for Increased Diameter of 4-Pair UTP and ScTP Cables

ANSI/TIA-568-B.2-2-2001

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling

ANSI/TIA-568-B.2-2001

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling

ANSI/TIA-568-B.2-3-2002

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination

ANSI/TIA-568-B.2-4-2002

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware

ANSI/TIA-568-B.2-5-2003

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 5

ANSI/TIA-568-B.2-6-2003

Commercial Building Telecommunicatins Cabling Standard - Part 2: Balanced Twisted-Pair Cabling Components - Addendum 6 - Category 6 Related Component Test Procedures

ANSI/TIA-758-1-1999

Customer-Owned Outside Plant Telecommunications Cabling

ANSI/TIA-758-A-2004

Customer-Owned Outside Plant Telecommunications Cabling

ANSI/TIA-854-2001

A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s (1000BASE-TX) Operating Over Category 6 Balanced Twisted Pair Cabling

ANSI/TIA-862-2002

Building Automation Systems Cabling Standard for Commercial Buildings

ANSI/TIA/EIA 455-11C-2002

Vibration Test Procedure for Fiber Optic Components and Cables

ANSI/TIA/EIA 455-1B-1998

Cable Flexing for Fiber Optic Interconnecting Devices

ANSI/TIA/EIA 455-200-2001

Insertion Loss of Connectorized Polarization - Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies

ANSI/TIA/EIA 455-201-2001

Return Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies

ANSI/TIA/EIA 455-61A-2000

Measurement of Fiber or Cable Attenuation Using an OTDR

ANSI/TIA/EIA 455-80-C-2003

Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power

ANSI/TIA/EIA 455-95A-2000

Absolute Optical Power Test for Optical Fibers and Cables

ANSI/TIA/EIA 472D000-A-1993

Sectional Specification for Fiber Optic Communications Cable for Outside Plant Use

ANSI/TIA/EIA 568-B-3-2000

Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling

ANSI/TIA/EIA 568-B.1-1-2001

Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius

ANSI/TIA/EIA 568-B.1-2-2003

Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling

ANSI/TIA/EIA 568-B.1-2001

Commercial Building Telecommunications Cabling Standard

ANSI/TIA/EIA 568-B.1-3-2003

Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type

ANSI/TIA/EIA 568-B.1-4-2003

Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber

ANSI/TIA/EIA 568-B.2-1-2002

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling

ANSI/TIA/EIA 568-B.2-2-2001

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling

ANSI/TIA/EIA 568-B.2-2001

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling

ANSI/TIA/EIA 568-B.2-3-2002

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination

ANSI/TIA/EIA 568-B.2-4-2002

Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware

ANSI/TIA/EIA 570-A-2-2002

Residential Telecommunications Cabling Standard - Addendum 2 - Control Cabling for Residences

ANSI/TIA/EIA 570-A-3-2002

Residential Telecommunications Cabling Standard - Addendum 3 - Whole-Home Audio Cabling for Residences

ANSI/TIA/EIA 758-1-1999

Customer-Owned Outside Plant Telecommunications Cabling

ANSI/TIA/EIA 758-1999

Customer-Owned Outside Plant Telecommunications Cabling

ANSI/TIA/EIA 854-2001

A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s (1000BASE-TX) Operating Over Category 6 Balanced Twisted Pair Cabling

ANSI/TIA/EIA 862-2002

Building Automation Systems Cabling Standard for Commercial Buildings

ANSI/UL 1072-2006

Standard for Safety for Medium-Voltage Power Cables (Proposal dated February 24, 2006)

ANSI/UL 1277-2005

Standard for Safety for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (4th edition)

ANSI/UL 13-2005

Standard for Safety for Power-Limited Circuit Cables

ANSI/UL 1424-2005

Standard for Safety for Cables for Power-Limited Fire-Alarm Circuits

ANSI/UL 1426-2001

Cables for Boats

ANSI/UL 1569-2005

Standard for Safety for Metal-Clad Cables

ANSI/UL 1655-2004

Standard for Safety for Community-Antenna Television Cables

ANSI/UL 1666-2002

Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts

ANSI/UL 1682-1998

Standard for Safety for Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type

ANSI/UL 209-2005

Standard for Safety for Cellular Metal Floor Raceways and Fittings

ANSI/UL 2196-2004

Standard for Tests for Fire Resistive Cables

ANSI/UL 2225-2005

Standard for Safety for Cables and Cable-Fittings for Use in Hazardous (Classified) Locations

ANSI/UL 2239-2004

Standard for Hardware for the Support of Conduit, Tubing and Cable

ANSI/UL 2556-2005

Standard Test Methods for Wires and Cables (Bulletin)

ANSI/UL 4-2003

Armored Cable

ANSI/UL 44-2005

Rubber-Insulated Wires and Cables

ANSI/UL 444-2005

Standard for Safety for Communications Cables

ANSI/UL 493-1997

Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables

ANSI/UL 5-2003

Surface Metal Raceways and Fittings

ANSI/UL 568-2004

Standard for Safety for Nonmetallic Cable Tray Systems

ANSI/UL 5A-2003

Standard for Safety for Non-Metallic Surface Raceways and Fittings

ANSI/UL 5B-2004

Strut-Type Channel Raceways and Fittings

ANSI/UL 5C-2003

Standard for Safety for Surface Raceways and Fittings for Use with Data, Signal and Control Circuits

ANSI/UL 83-2003

Thermoplastic-Insulated Wires and Cables

ANSI/UL 854-2002

Service-Entrance Cables

ANSI/UL 884-2005

Standard for Safety for Underfloor Raceways and Fittings

ASTM A 523-1996

Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

ASTM B 694-2003

Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding

ASTM B 736-2000

Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock

ASTM B 784-2000

Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables

ASTM D 1047-1995

Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable

ASTM D 1248-2005

Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable

ASTM D 1351-2002

Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable

ASTM D 1523-2000

Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation

ASTM D 2219-2002

Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation

ASTM D 2220-2002

Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation

ASTM D 2308-2002

Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable

ASTM D 2633-2002

Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

ASTM D 2655-2000

Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V

ASTM D 2656-2000

Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V

ASTM D 2768-1995

Standard Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable

ASTM D 2770-2001

Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable

ASTM D 2802-2003

Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable

ASTM D 3485-2002

Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

ASTM D 3554-2001

Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation

ASTM D 3555-2001

Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90oC Operation

ASTM D 4244-1995

Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable

ASTM D 4245-2002

Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation

ASTM D 4246-2002

Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation

ASTM D 4313-2003

Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable

ASTM D 4314-2005

Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable

ASTM D 4363-1998

Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable

ASTM D 4565-1999

Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

ASTM D 4566-2005

Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

ASTM D 4568-1999

Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials

ASTM D 470-2005

Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable

ASTM D 4730-2002

Standard Specification for Flooding Compounds for Telecommunications Wire and Cable

ASTM D 4731-2002

Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable

ASTM D 4732-2002

Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable

ASTM D 4872-1999

Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds

ASTM D 532-1990

Natural Rubber Jacket for Wire and Cable

ASTM D 5424-2005

Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ASTM D 5537-2003

Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

ASTM D 5875-1995

Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

ASTM D 6070-2002

Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

ASTM D 6096-2002

Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation

ASTM D 6113-2003

Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

ASTM D 831-1994

Standard Test Method for Gas Content of Cable and Capacitor Oils

ASTM D 866-1999

Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable

ASTM E 585/E 585M-2004

Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable

ASTM F 1835-1997

Standard Guide for Cable Splicing Installations

ASTM F 1837M-1997

Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

ASTM F 1883-2003

Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units

ASTM F 2180-2002

Standard Specification for Metallic Implantable Strands and Cables

UL 1063-1998

(Machine-tool wires and cables )

UL 1072-1995

(Medium-voltage power cables )

UL 1277-2001

(Electrical power and control tray cables with optional optical-fiber members )

UL 13-1996

(Power-limited circuit cables )

UL 1309-1995

(Marine shipboard cable )

UL 1425-1998

(Cables for non-power-limited fire-alarm circuits )

UL 1426-2001

(Electrical cables for boats )

UL 1569-1999

(Metal-clad cables )

UL 1581-2001

(Reference standard for electrical wires, cables, and flexible cords )

UL 1651-1997

(Optical fiber cable )

UL 1655-1997

(Community-antenna television cables )

UL 1666-2000

(Test for flame propagation height of electrical and optical-fiber cables installed vertically in shafts )

UL 1673-1996

(Electric space heating cables )

UL 1682-2002

(Plugs, receptacles, and cable connectors, of the pin and sleeve type )

UL 1685-1997

(Vertical-tray fire-propagation and smoke-release test for electrical and optical-fiber cables )

UL 209-1998

(Cellular metal floor raceways and fittings )

UL 2196-2001

(Tests for fire resistive cables )

UL 2225-1996

(Metal-clad cables and cable-sealing fittings for use in hazardous (classified) locations )

UL 2250-1999

(Instrumentation tray cable )

UL 4-1996

(Armored cable )

UL 44-1999

(Thermoset-insulated wires and cables )

UL 444-2002

(Communications cables )

UL 493-1995

(Thermoplastic-insulated underground feeder and branch-circuit cables )

UL 5-1996

(Surface metal raceways and fittings )

UL 568-2002

(Non-metallic cable tray systems )

UL 5A-2003

(Nonmetallic surface raceways and fittings )

UL 5C-1998

(Surface raceways and fittings for use with data, signal, and control circuits )

UL 719-2002

(Nonmetallic-sheathed cables )

UL 814-2004

(Gas-tube-sign and ignition cable )

UL 83-2003

(Thermoplastic-insulated wires and cables )

UL 854-1999

(Service-entrance cables )