IEEE 1073.3.2-2000

(Medical device communications - Transport profile - IrDA based cable connected)

IEEE 1073.4.1-2000

(Medical device communications - Physical layer interface - Cable connected)

IEEE 1120-1990

(Guide to the factors to be considered in the planning, design, and installation of submarine power and communications cables)

IEEE 1143-1994

(Guide on shielding practice for low voltage cables)

IEEE 1185-1994

(Guide for installation methods for generating station cables)

IEEE 1202-1991

(Flame testing of cables for use in cable tray in industrial and commercial occupancies)

IEEE 1210-1996

(Determining compatibility of cable pulling lubricants with wire and cable)

IEEE 1235-2000

(Guide for the properties of identifiable jackets for underground power cables and ducts)

2-1999

(Guide for specifying and selecting power, control, and special-purpose cable for petroleum and chemical plants)

IEEE 1300-1996

(Guide for cable connections for gas-insulated substations)

IEEE 1333-1994

(Guide for installation of cable using the guided boring method)

IEEE 1406-1998

(Guide to the use of gas-in-fluid analysis for electric power cable systems)

IEEE 1407-1998

(Trial-use guide for accelerated aging tests for medium-voltage extruded electric power cables using water-filled tanks)

IEEE 383-1974

(Type test of class 1E electric cables; field splices and connections for nuclear power generating stations)

IEEE 400-2001

(Guide for field testing and evaluation of the insulation of shielded power cable systems)

IEEE 404-2000

(Extruded and laminated dielectric shielded cable joints rated 2500 V to 500000 V)

IEEE 48-1996

(Test procedures and requirements for alternating-current cable terminations 2.5 kV through 765 kV)

IEEE 525-1992

(Guide for the design and installation of cable systems in substations)

IEEE 532-1993

(Guide for selecting and testing jackets for underground cables)

IEEE 576-2000

(Recommended practice for installation, termination, and testing of insulated power cable as used in industrial and commercial applications)

IEEE 592-1990

(Exposed semiconducting shields on high-voltage cable joints and separable insulated connectors)

IEEE 628-2001

(Criteria for the design, installation, and qualification of raceway systems for class 1E circuits for nuclear power generating stations)

IEEE 635-1989

(Guide for selection and design of aluminium sheaths for power cables)

IEEE 664-1993

(Guide for laboratory measurement of the power dissipation characteristics of aeolian vibration dampers for single conductors)

IEEE 835-1994

(Power cable ampacity tables)

IEEE 848-1996

(Procedure for the determination of the ampacity derating of fire-protected cables)

IEEE C 62.22.1-1996

(Guide for the connection of surge arresters to protect insulated, shielded electric power cable systems)