HOMETECHNICAL LIB


BS standards cable

 

BS cable standards

EN |  BS |  DIN |  IEC |  IEEE  |  NF  |  ANSI |  JIS  |  GB |  ISO |

BS cable standard code

Name

BIP 0007-2004

Telecommunication cabling and equipment installations - A Guide to requirements and responsibilities

BS 1858-2002

Electric cables - Accessories - Bitumen-based filling compounds

BS 196-1961

Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts

BS 2316 Pts.1 & 2-1968

Specification for radio-frequency cables. General requirements and tests. British Government Services requirements

BS 2484-1985

Specification for straight concrete and clayware cable covers

BS 2562-1979

Specification for cable boxes for transformers and reactors

BS 2E 21-1957

Pren type electric cables for aircraft

BS 2G 180-1974

Specification for permanent splicing of aircraft electrical cables

BS 2G 215-1-1985

Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for conductors

BS 2G 215-2-1989

Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for terminations

BS 2G 221-1980

Specification for Minyvin type electric cables (metric units)

BS 2G 223-1989

Specification for screen terminating devices for aircraft electric cables

BS 2G 232-1987

Specification for electric cables for general airframe or equipment interconnect use (135 °C), wrapped insulation

BS 2G 238-1996

Specification for electric cables for general airframe or equipment interconnect use (260 °C), nickel plated copper and copper alloy conductors, with wrapped insulation

BS 3454-1995

Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines

BS 3858-1992

Specification for binding and identification sleeves for use on electric cables and wires

BS 3905-1995

Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines

BS 3988-1970

Specification for wrought aluminium for electrical purposes - Solid conductors for insulated cables

BS 3G 197-1982

Specification for stud-type terminal blocks for terminations on aircraft electric cables

BS 3G 198-2-1997

Sleeves for aircraft electric cables and equipment wires - Specification for slip-on sleeves for identification purposes

BS 3G 198-4-1996

Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation

BS 3G 210-1996

Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 °C) or nickel plated copper conductors (260 °C)

BS 3G 231-1997

Specification for conductors for general-purpose aircraft electrical cables and aerospace applications

BS 3G 233-1990

Specification for electric cables for general airframe or equipment interconnect use (135 °C), extruded insulation

BS 4553-1-1998

Specification for 600/1000 V single-phase split concentric electric cables - Cables having PVC insulation

BS 4553-2-1998

Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation

BS 4553-3-1998

Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire

BS 4579-2-1973

Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors

BS 4678-1-1971

Cable trunking - Steel surface trunking

BS 4678-2-1973

Cable trunking - Steel underfloor (duct) trunking

BS 4678-4-1982

Cable trunking - Specification for cable trunking made of insulating material

BS 4727 Pt.2 Group 08-1986

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electric cable terminology

BS 4727-2 Group 08-1994

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to power engineering - Electric cables

BS 4737-3.30-1986

Intruder alarm systems - Specifications for components - Specification for PVC insulated cables for interconnecting wiring

BS 4808-1-1972

Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - General requirements and tests

BS 4808-2-1972

Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, single

BS 4808-3-1972

Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables and equipment wires, with solid or stranded conductors, screened, single

BS 4808-4-1974

Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, in pairs, triples, quads and quintuples

BS 4808-5-1973

Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables with solid or stranded conductors, screened and sheathed, one pair

BS 4937-30-1993

International thermocouple reference tables - Extension and compensating cables - Tolerances and identification system

BS 4G 178-2-1986

Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests)

BS 4G 198-1-1997

Sleeves for aircraft electric cables and equipment wires - Specification for elastomeric sleeves for binding and identification

BS 4G 198-3-1999

Sleeves and moulded components for aircraft electric cables and equipment wires - Specification for heat-shrinkable sleeving for binding, insulation, and identification

BS 5099-2004

Electric cables - Voltage levels for spark testing

BS 5308-1-1986

Instrumentation cables - Specification for polyethylene insulated cables

BS 5308-2-1986

Instrumentation cables - Specification for PVC insulated cables

BS 5372-1997

Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors

BS 542-1973

Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries

BS 5G 178-1-1993

Crimped joints for aircraft electrical cables and wires - Specification for design requirements (including tests) for components and tools

BS 6004-2000

Electric cables - PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring

BS 6007-2000

Electric cables - Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring

BS 6007-2006

Electric cables - Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring

BS 6121-1-2005

Mechanical cable glands - Armour glands - Requirements and test methods

BS 6121-5-2005

Mechanical cable glands - Code of practice for selection, installation and inspection of cable glands and armour glands

BS 6207-3-2001

Mineral insulated cables with a rated voltage not exceeding 750 V. Guide to use

BS 6234-1987

Specification for polyethylene insulation and sheath of electric cables

BS 638-4-1996

Arc welding power sources, equipment and accessories - Specification for welding cables

BS 6387-1994

Specification for performance requirements for cables required to maintain circuit integrity under fire conditions

BS 6435-1984

Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors

BS 6436-1984

Specification for ground mounted distribution transformers for cable box or unit substation connection

BS 6469-99.1-1992

Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811: Non-electrical tests

BS 6469-99.2-1992

Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469: Electrical tests

BS 6480-1988

Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V

BS 6500-2000

Electric cables - Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments

BS 6513-1-1984

Wideband cabled distribution systems - Glossary of terms

BS 6513-2-1984

Wideband cabled distribution systems - Methods of measurement

BS 6513-4-1984

Wideband cabled distribution systems - Specification for performance requirements, for upstream television

BS 6513-5-1987

Wideband cabled distribution systems - Recommendations for one-way and interactive data services

BS 6622-1999

Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV

BS 6701-2004

Telecommunications equipment and telecommunications cabling - Specification for installation, operation and maintenance

BS 6708-1998

Flexible cables for use at mines and quarries

BS 6724-1997

Electric cables - Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire

BS 6883-1999

Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods

BS 6904-1987

Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above

BS 6910-1-1988

Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials

BS 6910-2-1989

Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation

BS 6913-6-1991

Operation and maintenance of earth-moving machinery - Specification for identification and marking of electrical wires and cables

BS 6946-1988

Specification for metal channel cable support systems for electrical installations

BS 7019-1989

Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines

BS 7197-1990

Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV

BS 7211-1998

Electric cables - Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire

BS 7215-1990

Specification for separable insulated cable connector systems above 1 kV and up to 36 kV

BS 7346-6-2005

Components for smoke and heat control systems - Specifications for cable systems

BS 7383-1990

Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines

BS 7450-1991

Method for determination of economic optimization of power cable size

BS 7540-2-2005

Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22

BS 7540-3-2005

Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22

BS 7609-1992

Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors

BS 7629-1-1997

Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multicore cables

BS 7629-2-1997

Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multipair cables

BS 7655-1.2-1997

Specification for insulating and sheathing materials for cables - Part 1. Cross-linked elastomeric insulating compounds - Section 1.2 General 90 °C application

BS 7655-1.3-2000

Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - XLPE - Sec1.3 XLPE

BS 7655-1.4-2000

Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Oil resisting types - Oil resisting types

BS 7655-1.5-2000

Specification for insulating and sheathing materials for cables - Part 1: Cross-linked elastomeric insulating compounds - Section 1.5: Flame retardant composites

BS 7655-10.1-2000

Specification for insulating and sheathing materials for cables - Part 10: Polyethylene sheathing compounds - Section 10.1: Thermoplastic medium density polyethylene (MDPE) sheathing compound

BS 7655-2.3-2000

Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - General application - General application

BS 7655-2.4-2000

Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.4: Welding cable covering

BS 7655-2.6-2000

Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.6: Sheathing compounds for ships' wiring and offshore applications

BS 7655-3.2-2000

Specification for insulating and sheathing materials for cables - PVC insulating compounds - Hard grade types - Hard grade types

BS 7655-4.2-2000

Specification for insulating and sheathing materials for cables - PVC sheathing compounds - General application - General application

BS 7727-1994

Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2

BS 7769-1.1-1997

Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - General

BS 7769-1.2-1994

Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - Sheath eddy current loss factors for two circuits in flat formation

BS 7769-2-2.1-1997

Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance - Section 2.1: Calculation of thermal resistance

BS 7769-2.1-1997

Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance

BS 7769-2.2-1997

Electric cables - Calculation of the current rating - Thermal resistance - A method for calculating reduction factors for groups of cables in free air, protected from solar radiation

BS 7769-3.1-1997

Electric cables - Calculation of the current rating - Sections on operating conditions - Reference operating conditions and selection of cable type

BS 7816-3-1998

Determination of long-term radiation ageing in polymers - Procedures for in-service monitoring of low-voltage cable materials

BS 7821-2.1-1995

Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - General requirements

BS 7821-2.2-1998

Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes of type 1 for use on distribution transformers meeting the requirements of BS 7821-2.1

BS 7821-2.3-1998

Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of BS 7821-2.1

BS 7835-2000

Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire

BS 7846-2000

Electric cables - 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire

BS 7861-2-1997

Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting

BS 787-1-1969

Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V)

BS 787-2-1968

Specification for mining type flameproof gate-end boxes - Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts)

BS 787-3-1971

Specification for mining type flameproof gate-end boxes - Gate-end boxes with lighting transformers

BS 787-4-1972

Specification for mining type flameproof gate-end boxes - Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V)

BS 7870-1-1996

LV and MV polymeric insulated cables for use by distribution and generation utilities - General

BS 7870-2-1999

LV and MV polymeric insulated cables for use by distribution and generation utilities - Methods of test

BS 7870-3.10-2001

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors

BS 7870-3.11-2001

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors

BS 7870-3.12-2001

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire

BS 7870-3.20-2001

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors

BS 7870-3.21-2001

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors

BS 7870-3.40-2001

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors

BS 7870-3.50-2005

LV and MV polymeric insulated cables for use by distribution and generation utilities - Part 3: Specification for distribution cables of rated voltage 0.6/1 kV - Section 3050: XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire (Implementation of HD 603)

BS 7870-4.10-1999

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 11 kV and 33 kV cables - Single core 11 kV and 33 kV cables

BS 7870-4.11-1999

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 33 kV lead sheathed cables - Single core 33 kV lead sheathed cables

BS 7870-4.20-1999

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Three-core 11 kV cables - Three core 11 kV cables

BS 7870-5-1999

LV and MV polymeric insulated cables for use by distribution and generation utilities - Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution

BS 7870-6.1-1999

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - PVC insulated and PVC sheathed cables

BS 7870-6.2-1999

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - XLPE or HEPR insulated and PVC sheathed cables

BS 7870-6.3-1999

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - Cables with thermosetting insulation and non-halogenated sheath

BS 7870-7.1-2003

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring

BS 7870-7.2-2003

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring

BS 7870-8.1-2003

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors - Section 8.1 Single wire armoured and PVC sheathed multicore cable with copper conductors

BS 7870-8.2-2003

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multipair cable with copper conductors - Section 8.2 Single wire armoured and PVC sheathed multipair cable with copper conductors

BS 7870-8.3-2003

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance - Section 8.3 Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance

BS 7870-8.4-2003

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance - Section 8.4 Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance

BS 7870-8.5-2003

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath - Section 8.5 Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath

BS 7870-8.6-2003

LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors - Section 8.6 Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors

BS 7888-4.1-2006

Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42)kV - Part 1: Cables with extruded insulation

BS 7888-4.2-2006

Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42)kV - Part 2: Cables with impregnated paper insulation

BS 7889-1997

Electric cables - Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V

BS 7894-2003

MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV

BS 7912-2001

Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (Um=72.5 kV) to 132kV (Um=145kV) - Requirements and test methods

BS 7917-1999

Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods

BS 7919-2001

Electric cables - Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments

BS 7922-2004

Electric cables - Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV) - Requirements and test methods

BS 7923-2004

Electric cables - Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV) - Requirements and test methods

BS 7933-1-1998

Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state

BS 7970-2005

Electric cables - Metallic wire and foil sheath constructions of power cables having XLPE insulation for rated voltages from 66kV (Um = 72.5 kV) to 132kV (Um = 145 kV)

BS 8434-2-2003

Methods of test for assessment of the fire integrity of electric cables - Test for unprotected small cables for use in emergency circuits - BS EN 50200 with 930 deg flame and with water spray

BS 8436-2004

Electric cables - 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids - Multicore cables

BS 91-1998

Electric cable soldering sockets - Specification

BS AU 16a-1989

Specification for electrical cable connectors (17.5 A maximum continuous rating)

BS AU 255-1-1994

Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thick walled insulated cables

BS AU 255-2-1994

Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables

BS AU 267-1998

Code of practice for breakaway cables and secondary couplings

BS AU 7a-1983

Specification for colour code for road vehicle electrical cables

BS AU 88a-1985

Recommendations for ratings for light duty cables for automobile use

BS AU 91-1965

Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system)

BS DD CLC/TS 50429-2005

Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers

BS DD CLC/TS 50430-2005

Optical fibre cables - Gas pipe cables - Family specifications for cables to be installed in high pressure gas pipes

BS DD CLC/TS 50431-2005

Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes

BS DD ENV 13149-2-2000

Public transport - Road vehicle scheduling and control systems - WORLDFIP cabling specifications

BS DD IEC/PAS 62338-2003

Screened balanced cables - Coupling attenuation measurement, triaxial method

BS DD ISO/TS 16553-2006

Road vehicles - Data cables - Test methods and requirements

BS EN 10257-1-1998

Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Land cables

BS EN 10257-2-1998

Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Submarine cables

BS EN 12548-1999

Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves

BS EN 12613-2001

Plastic warning devices for underground cables and pipelines with visual characteristics

BS EN 13149-5-2004

Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications

BS EN 13920-3-2003

Aluminium and aluminium alloys - Scrap - Wire and cable scrap

BS EN 175500-1997

Harmonized system of quality assessment for electronic components - Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval

BS EN 186150-1997

Connector sets for optical fibres and cables - Type OCCA-BU

BS EN 186160-1997

Connector sets for optical fibres and cables - Type OCCA-PC

BS EN 186170-1998

Harmonized system of quality assessment for electronic components - Sectional specification:connector sets for optical fibres and cables - Type RCC

BS EN 186260-1998

Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC

BS EN 186270-1998

Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSH

BS EN 186290-1998

Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO

BS EN 186300-1999

Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables type MSC

BS EN 186310-1999

Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MF

BS EN 187105-2002

Single mode optical cable (duct/direct buried installation)

BS EN 2083-2001

Aerospace series - Copper and copper alloy conductors for electrical cables - Product standard

BS EN 2084-2005

Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification

BS EN 2266-003-2005

Cables, electrical, for general purpose — Operating temperatures between -55 °C and 200 °C — Part 003: Ink jet printable — Product standard

BS EN 2266-005-2005

Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard

BS EN 2266-007-2005

Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard

BS EN 2267-002-2005

Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 002: General

BS EN 2267-003-2005

Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C— Part 003: Inkjet printable — Product standard

BS EN 2267-007-2005

Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard

BS EN 2267-008-2005

Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard

BS EN 2267-009-2005

Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard

BS EN 2267-010-2005

Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard

BS EN 2591-609-2005

Elements of electrical and optical connection — Test methods — Part 609: Optical elements — Effectiveness of cable attachment — Cable cyclic flexing

BS EN 2591-610-2001

Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable pulling

BS EN 2591-611-2001

Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable torsion

BS EN 2591-612-2001

Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable axial compression

BS EN 2713-003-2005

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, ink jet printable - Product standard

BS EN 2713-007-2005

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard

BS EN 2714-002-2005

Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 002: Screened and jacketed — General

BS EN 2714-003-2005

Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 003: Screened (spiral) and jacketed, ink jet printable — Product standard

BS EN 2714-007-2005

Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard

BS EN 2714-011-2005

Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard

BS EN 2714-012-2005

Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard

BS EN 2714-013-2005

Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard

BS EN 2853-2005

Current ratings for electrical cables with conductor EN 2083

BS EN 3475-100-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - General

BS EN 3475-201-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Visual examination

BS EN 3475-202-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Mass

BS EN 3475-301-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Ohmic resistance per unit length

BS EN 3475-303-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Insulation resistance

BS EN 3475-304-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Surface resistance

BS EN 3475-305-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Overload resistance

BS EN 3475-306-2005

Cables, electrical, aircraft use — Test methods — Part 306: Continuity of conductors

BS EN 3475-307-2005

Cables, electrical, aircraft use — Test methods — Part 307: Corona extinction voltage

BS EN 3475-401-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Accelerated ageing

BS EN 3475-402-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Shrinkage and delamination

BS EN 3475-403-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Delamination and blocking

BS EN 3475-404-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal shock

BS EN 3475-405-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Bending at ambient temperature

BS EN 3475-406-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Cold bend test

BS EN 3475-407-2005

Cables, electrical, aircraft use — Test methods — Part 407: Flammability

BS EN 3475-408-2005

Cables, electrical, aircraft use — Test methods — Part 408: Fire resistance

BS EN 3475-409-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing

BS EN 3475-410-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal endurance

BS EN 3475-411-2005

Cables, electrical, aircraft use — Test methods — Part 411: Resistance to fluids

BS EN 3475-412-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Humidity resistance

BS EN 3475-413-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Wrap back test

BS EN 3475-414-2005

Cables, electrical, aircraft use — Test methods — Part 414: Differential scanning calorimeter (DSC test)

BS EN 3475-415-2005

Cables, electrical, aircraft use — Test methods — Part 415: Rapid change of temperature

BS EN 3475-416-2005

Cables, electrical, aircraft use — Test methods — Part 416: Thermal stability

BS EN 3475-501-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Dynamic cut-through

BS EN 3475-502-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Notch propagation

BS EN 3475-503-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion

BS EN 3475-504-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Torsion

BS EN 3475-505-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile tests on conductors and strands

BS EN 3475-506-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Plating continuity

BS EN 3475-507-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Adherence of plating

BS EN 3475-508-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Plating thickness

BS EN 3475-509-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability

BS EN 3475-510-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile strength and elongation of extruded insulation, sheath and jacket material

BS EN 3475-511-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion

BS EN 3475-512-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Flexure endurance

BS EN 3475-513-2005

Cables, electrical, aircraft use — Test methods — Part 513: Deformation resistance (Installation with plastic cable ties)

BS EN 3475-603-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to wet arc tracking

BS EN 3475-604-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to dry arc propagation

BS EN 3475-605-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Wet short circuit test

BS EN 3475-701-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor

BS EN 3475-702-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Screen pushback capability

BS EN 3475-703-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Permanence of manufacturer's marking

BS EN 3475-704-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Flexibility

BS EN 3475-705-2005

Cables, electrical, aircraft use — Test methods — Part 705: Contrast measurement

BS EN 3475-706-2005

Cables, electrical, aircraft use — Test methods — Part 706: Laser markability

BS EN 3475-801-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length

BS EN 3475-802-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance

BS EN 3475-803-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation

BS EN 3475-804-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Velocity of propagation

BS EN 3475-805-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Characteristic impedance

BS EN 3475-806-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Attenuation

BS EN 3475-807-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Transfer impedance

BS EN 3475-808-2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Cross-talk

BS EN 3719-2005

Aluminium or aluminium alloy conductors for electrical cables — Product standard

BS EN 3745-511-2002

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion

BS EN 4049-002-2005

Thermocouple extension cable — Operating temperatures between -65 °C and 260 °C — Part 002: General

BS EN 4057-201-2005

Cable ties for harnesses — Test methods — Part 201: Visual examination

BS EN 4057-202-2005

Cable ties for harnesses — Test methods — Part 202: Examination of mass and dimensions

BS EN 4057-301-2005

Cable ties for harnesses — Test methods — Part 301: Salt mist test

BS EN 4057-303-2005

Cable ties for harnesses — Test methods — Part 303: Resistance to fluids

BS EN 4057-305-2005

Cable ties for harnesses -- Test methods -- Part 305: Coulor fastness??

BS EN 4057-405-2005

Cable ties for harnesses — Test methods — Part 405: Compass safe distance

BS EN 4057-407-2005

Cable ties for harnesses — Test methods — Part 407: Verification of application tool settings

BS EN 4165-013-2005

Connectors, electrical, rectangular, modular — Operating temperature 175 ℃ continuous??— Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 — Product standard

BS EN 4434-2005

Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances)

BS EN 45510-2-8-2004

Guide for procurement of power station equipment - Electrical equipment - Power cables

BS EN 50083-10-2002

Cabled distribution systems for television and sound signals - System performance for return paths

BS EN 50083-3-2002

Cabled distribution systems for television and sound signals - Active wideband equipment for coaxial cable networks

BS EN 50083-4-1999

Cabled distribution systems for television and sound signals - Passive wideband equipment for coaxial cable networks

BS EN 50083-5-2002

Cabled distribution systems for television and sound signals - Headend equipment

BS EN 50083-7-1997

Cabled distribution systems for television and sound signals - System performance

BS EN 50083-8-2002

Cabled distribution systems for television and sound signals - Electromagnetic compatibility for networks

BS EN 50083-9-2003

Cabled distribution systems for television and sound signals - Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams

BS EN 50085-2-3-2001

Cable trunking and cable ducting systems for electrical installations - Particular requirements for slotted cable trunking systems intended for installation in cabinets - Section 3: Slotted in cabinets

BS EN 50090-9-1-2005

Home and building electronic systems (HBES) - Installation requirements - Generic cabling for HBES class 1 twisted pair

BS EN 50098-1-1999

Customer premises cabling for information technology - ISDN basic access

BS EN 50098-2-1996

Customer premises cabling for information technology - 2048 kbit/s ISDN primary access and leased line network interface

BS EN 50109-1-1996

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - General requirements and tests

BS EN 50109-2-1-1996

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes A to E, V and W

BS EN 50109-2-2-1996

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W

BS EN 50109-2-3-1996

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Contacts of electrical connectors

BS EN 50109-2-4-1996

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Centre contacts of RF connectors, series SMZ

BS EN 50109-2-5-1996

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Termination of twin-ax cable for databus applications

BS EN 50117-1-2002

Coaxial cables - Part 1: Generic specification

BS EN 50117-2-1-2005

Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1000 MHz

BS EN 50117-2-2-2004

Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1000 MHz

BS EN 50117-2-3-2004

Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz

BS EN 50117-2-4-2004

Coaxial cables - Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3000 MHz

BS EN 50117-2-5-2004

Coaxial cables - Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3000 MHz

BS EN 50117-3-1-2002

Coaxial cables - Sectional specifications for cables used in telecom applications - Miniaturized cables used in digital communication systems

BS EN 50117-3-1996

Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables

BS EN 50117-4-1996

Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables

BS EN 50117-5-1997

Coaxial cables used in cabled distribution networks - Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz

BS EN 50117-6-1997

Coaxial cables used in cabled distribution networks - Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz

BS EN 50143-1999

Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV

BS EN 50146-2000

Cable ties for electrical installations

BS EN 50173-1-2003

Information technology - Generic cabling systems - General requirements and office areas

BS EN 50174-1-2001

Information technology - Cabling installation - Specification and quality assurance

BS EN 50174-2-2001

Information technology - Cabling installation - Installation planning and practices inside buildings

BS EN 50174-3-2004

Installation technology - Cabling installation - Installation planning and practices outside buildings

BS EN 50200-2006

Method of test for resistance to fire of unprotected small cables for use in emergency circuits

BS EN 50214-1998

Flexible cables for lifts

BS EN 50249-2003

Electromagnetic locators for buried pipes and cables - Performance and safety

BS EN 50262-1999

Cable glands for electrical installations

BS EN 50264-1-2002

Railway applications - Railway rolling stock cables having special fire performance - Standard wall - General requirements

BS EN 50264-2-2002

Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Single core cables

BS EN 50264-3-2002

Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Multicore cables

BS EN 50266-1-2001

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus

BS EN 50266-2-1-2001

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A F/R

BS EN 50266-2-2-2001

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A

BS EN 50266-2-3-2001

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category B

BS EN 50266-2-4-2001

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C

BS EN 50266-2-5-2001

Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Small cables - Category D

BS EN 50267-1-1999

Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Apparatus

BS EN 50267-2-1-1999

Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas

BS EN 50267-2-2-1999

Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of acidity of gases for materials by measuring pH and conductivity

BS EN 50267-2-3-1999

Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity

BS EN 50288-1-2004

Multi-element metallic cables used in analogue and digital communication and control - Generic specification

BS EN 50288-2-1-2004

Multi-element metallic cables used in analogue and digital communication and control - Horizontal and building backbone cables - Horizontal and building backbone cables

BS EN 50288-2-2-2004

Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables

BS EN 50288-3-1-2004

Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterized up to 100 MHz - Horizontal and building backbone cables

BS EN 50288-3-2-2004

Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables - Work area and patch cord cables

BS EN 50288-4-1-2004

Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables

BS EN 50288-4-2-2004

Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables

BS EN 50288-5-1-2004

Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables

BS EN 50288-5-2-2004

Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables

BS EN 50288-6-1-2004

Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables

BS EN 50288-6-2-2004

Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables

BS EN 50289-1-1-2001

Communication cables - Specifications for test methods - Electrical test methods - General requirements - General requirements

BS EN 50289-1-10-2002

Communication cables - Specifications for test methods - Electrical test methods - Crosstalk

BS EN 50289-1-11-2002

Communication cables - Specifications for test methods - Electrical test methods - Characteristic impedance, input impedance, return loss

BS EN 50289-1-12-2005

Communication cables - Specifications for test methods - Electrical test methods - Inductance

BS EN 50289-1-13-2004

Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables

BS EN 50289-1-14-2004

Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware

BS EN 50289-1-15-2004

Communication cables - Specifications for test methods - Electromagnetic performance - Coupling attenuation of links and channels (laboratory conditions)

BS EN 50289-1-2-2001

Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance

BS EN 50289-1-3-2001

Communication cables - Specifications for test methods - Electrical test methods - Dielectric strength - Dielectric strength

BS EN 50289-1-4-2001

Communication cables - Specifications for test methods - Electrical test methods - Insulation resistance

BS EN 50289-1-5-2001

Communication cables - Specifications for test methods - Electrical test methods - Capacitance - SEC5 : Capacitance

BS EN 50289-1-6-2002

Communication cables - Specifications for test methods - Electrical test methods - Electromagnetic performance

BS EN 50289-1-7-2001

Communication cables - Specifications for test methods - Electrical test methods - Velocity of propagation - sec7 : Velocity of propagation

BS EN 50289-1-8-2001

Communication cables - Specifications for test methods - Electrical test methods - Attentuation - Sec8 : attentuation

BS EN 50289-1-9-2002

Communication cables - Specifications for test methods - Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)

BS EN 50289-3-1-2001

Communication cables - Specifications for test methods - Mechanical test methods - General requirements - General requirements

BS EN 50289-3-10-2005

Communication cables - Specifications for tests methods - Mechanical test methods - Torsion and twisting

BS EN 50289-3-11-2001

Communication cables - Specifications for test methods - Mechanical test methods - Cable cut-through resistance

BS EN 50289-3-12-2001

Communication cables - Specifications for test methods - Mechanical test methods - Shot gun damage

BS EN 50289-3-13-2003

Communication cables - Specifications for test methods - Mechanical test methods - Aeolian vibration

BS EN 50289-3-15-2003

Communication cables - Specifications for test methods - Mechanical test methods - Underwater cable resistance to hydrostatic pressure

BS EN 50289-3-16-2001

Communication cables - Specifications for test methods - Mechanical test methods - Cable tensile performance

BS EN 50289-3-17-2002

Communication cables - Specifications for test methods - Mechanical test methods - Adhesion of dielectric and sheath

BS EN 50289-3-2-2001

Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength and elongation for conductor

BS EN 50289-3-4-2001

Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath

BS EN 50289-3-5-2001

Communication cables - Specifications for test methods - Mechanical test methods - Crush resistance of the cable

BS EN 50289-3-6-2001

Communication cables - Specifications for test methods - Mechanical test methods - Impact resistance of the cable

BS EN 50289-3-7-2001

Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of the cable sheath

BS EN 50289-3-8-2001

Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of cable sheath markings

BS EN 50289-3-9-2001

Communication cables - Specifications for test methods - Mechanical test methods - Bending tests

BS EN 50289-4-1-2001

Communication cables - Specifications for test methods - Environmental test methods - General requirements

BS EN 50289-4-11-2002

Communication cables - Specifications for test methods - Environmental test methods - A horizontal integrated fire test method

BS EN 50289-4-12-2004

Communication cables - Specifications for test methods - Environmental test methods - Vertical flame spread test on bunched small communication cables

BS EN 50289-4-14-2003

Communication cables - Specifications for test methods - Environmental test methods - Lightning

BS EN 50289-4-2-2001

Communication cables - Specifications for test methods - Environmental test methods - Water penetration

BS EN 50289-4-6-2001

Communication cables - Specifications for test methods - Environmental test methods - Temperature cycling

BS EN 50289-4-9-2001

Communication cables - Specifications for test methods - Environmental test methods - Pneumatic resistance

BS EN 50290-1-1-2001

Communication cables - General

BS EN 50290-1-2-2004

Communication cables - Definitions

BS EN 50290-2-1-2005

Communication cables - Common design rules and construction

BS EN 50290-2-20-2001

Communication cables - Common design rules and construction - General

BS EN 50290-2-21-2002

Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds

BS EN 50290-2-22-2002

Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds

BS EN 50290-2-23-2002

Communication cables - Part 2-23: Common design rules and construction - PE insulation

BS EN 50290-2-24-2002

Communication cables - Common design rules and construction - PE sheathing

BS EN 50290-2-25-2002

Communication cables - Common design rules and construction - Polypropylene insulation compounds

BS EN 50290-2-26-2002

Communication cables - Common design rules and construction - Halogen free flame retardant insulation compounds

BS EN 50290-2-27-2002

Communication cables - Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds

BS EN 50290-2-28-2002

Communication cables - Common design rules and construction - Filling compounds for filled cables

BS EN 50290-2-29-2002

Communication cables - Common design rules and construction - Cross-linked PE insulation compounds

BS EN 50290-2-30-2002

Communication cables - Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing

BS EN 50290-4-1-2002

Communication cables - General considerations for the use of cables - Environmental conditions and safety aspects

BS EN 50299-2002

Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV

BS EN 50300-2004

Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards

BS EN 50306-1-2002

Railway applications - Railway rolling stock cables having special fire performance - Thin wall - General requirements

BS EN 50306-2-2002

Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core cables

BS EN 50306-3-2002

Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed

BS EN 50306-4-2002

Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Multicore and multipair cables standard wall sheathed

BS EN 50307-2003

Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables

BS EN 50334-2001

Marking by inscription for the identification of cores of electric cables

BS EN 50336-2002

Bushings for transformers and reactor cable boxes not exceeding 36 kV

BS EN 50340-2002

Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV

BS EN 50343-2003

Railway applications - Rolling stock - Rules for installation of cabling

BS EN 50346-2003

Information technology - Cabling installation - Testing of installed cabling

BS EN 50355-2003

Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use

BS EN 50356-2002

Method for spark testing of cables

BS EN 50362-2003

Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits

BS EN 50363-0-2005

Insulating, sheathing and covering materials for low voltage energy cables - General introduction

BS EN 50363-1-2005

Insulating, sheathing and covering materials for low voltage energy cables — Part 1: Cross-linked elastomeric insulating compounds

BS EN 50363-2-1-2005

Insulating, sheathing and covering materials for low voltage energy cables — Part 2-1: Cross-linked elastomeric sheathing compounds

BS EN 50363-2-2-2005

Insulating, sheathing and covering materials for low voltage energy cables — Part 2-2: Cross-linked elastomeric covering compounds

BS EN 50363-3-2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds

BS EN 50363-4-1-2005

Insulating, sheathing and covering materials for low voltage energy cables — Part 4-1: PVC sheathing compounds

BS EN 50363-4-2-2005

Insulating, sheathing and covering materials for low voltage energy cables — Part 4-2: PVC covering compounds

BS EN 50368-2003

Cable cleats for electrical installations

BS EN 50369-2005

Liquid tight sheathing systems for cable management

BS EN 50406-1-2004

End user multi-pair cables used in high bit rate telecommunication networks - Aerial cables

BS EN 50406-2-2004

End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables

BS EN 50407-1-2004

Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor cables

BS EN 50414-2006

Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining

BS EN 60169-24-1994

Radio-frequency connectors - Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)

BS EN 60169-25-1994

Radio-frequency connectors - Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN)

BS EN 60228-2005

Conductors of insulated cables

BS EN 60230-2002

Impulse tests on cables and their accessories

BS EN 60332-1-1-2005

Tests on electrical and optical cables under fire conditions - Test for a vertical flame propagation for a single insulated wire or cable - Apparatus

BS EN 60332-1-2-2004

Tests on electric and optical fibre cables under fire conditions - Test for vertfical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

BS EN 60332-1-3-2004

Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single vertical insulated wire or cable - Procedure for determination of flaming droplets/particles

BS EN 60332-2-1-2005

Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single small insulated wire or cable - Apparatus

BS EN 60332-2-2-2004

Tests on electric and optical fibre cables under fire conditions - Tests for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame

BS EN 60371-3-8-1996

Specification for insulating materials based on mica - Specifications for individual materials - Mica paper tapes for flame-resistant security cables

BS EN 60439-5-1996

Specification for low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks

BS EN 60465-1992

Specification for unused insulating mineral oils for cables with oil ducts

BS EN 60526-2005

High-voltage cable plug and socket connections for medical X-ray equipment

BS EN 60603-9-1998

Connectors for frequencies below 3 MHz for use with printed boards - Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)

BS EN 60702-1-2002

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables

BS EN 60702-2-2002

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations

BS EN 60719-1993

Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V

BS EN 60728-6-2003

Cable networks for television signals, sound signals and interactive services - Optical equipment

BS EN 60728-7-1-2005

Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Physical (PHY) layer specification

BS EN 60728-7-2-2005

Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Media access control (MAC) layer specification

BS EN 60728-7-3-2005

Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) - Specification

BS EN 60794-1-1-2002

Optical fibre cables - Generic specification - General

BS EN 60794-1-2-2003

Optical fibre cables - Generic specification - Basic optical cable test procedures

BS EN 60794-2-11-2005

Optical fibre cables — Part 2-11: Indoor cables — Detailed specification for simplex and duplex cables for use in premises cabling

BS EN 60794-2-21-2006

Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution Cables for use in premises cabling

BS EN 60794-2-31-2006

Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling

BS EN 60794-3-10-2002

Optical fibre cables - Outdoor cables - Family specification for duct and directly buried optical telecommunication cables

BS EN 60794-3-20-2003

Optical fibre cables - Outdoor cables - Family specification for optical self-supporting aerial telecommunication cables

BS EN 60794-3-2002

Optical fibre cables - Sectional specification - Outdoor cables

BS EN 60811-1-1-1995

Insulating and sheathing materials of electric cables - Common test methods - General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties

BS EN 60811-1-2-1995

Insulating and sheathing materials of electric cables - Common test methods - General application - Thermal ageing methods

BS EN 60811-1-3-1995

Insulating and sheathing materials of electric cables - Common test methods - General application - Methods for determining the density - Water absorption tests - Shrinkage test - Section 3: Methods for determining the density - Water absorption tests - Shrinking test

BS EN 60811-1-4-1995

Insulating and sheathing materials of electric cables - Common test methods - General application - Tests at low temperature

BS EN 60811-2-1-1998

Insulating and sheathing materials of electric cables - Common test methods - Methods specific to elastomeric compounds - Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests

BS EN 60811-3-1-1995

Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking

BS EN 60811-3-2-1995

Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Loss of mass test - Thermal stability test

BS EN 60811-4-1-2004

Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polypropylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filter content measurement in PE by direct combustion - Measurement of carbon black content by TGA - Assessment of carbon black dispersion in polyethylene using a microscope

BS EN 60811-4-2-2004

Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation

BS EN 60811-5-1-2000

Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C

BS EN 60874-17-1997

Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock)

BS EN 60885-2-2003

Electrical test methods for electric cables - Partial discharge tests

BS EN 60885-3-2003

Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables

BS EN 60966-1-1999

Radio frequency and coaxial cable assemblies - Generic specification - General requirements and test methods

BS EN 60966-2-1-2003

Radio frequency and coaxial cable assemblies - Sectional specification for flexible coaxial cable assemblies

BS EN 60966-2-2-2003

Radio frequency and coaxial cable assemblies - Blank detail specification for flexible coaxial cable assemblies

BS EN 60966-2-3-2003

Radio frequency and coaxial cable assemblies - Detail specification for flexible coaxial cable assemblies

BS EN 60966-2-4-2003

Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2 connectors

BS EN 60966-2-5-2003

Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1000 MHz, IEC 61169-2 connectors

BS EN 60966-2-6-2003

Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3000 MHz, IEC 61169-24 connectors

BS EN 60966-3-1-2003

Radio frequency and coaxial cable assemblies - Blank detail specification for semi-flexible coaxial cable assemblies

BS EN 60966-3-2-2003

Radio frequency and coaxial cable assemblies - Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)

BS EN 60966-3-2003

Radio frequency and coaxial cable assemblies - Sectional specification for semi-flexible coaxial cable assemblies

BS EN 60966-4-1-2003

Radio frequency and coaxial cable assemblies - Blank detail specification for semi-rigid coaxial cable assemblies

BS EN 60966-4-2003

Radio frequency and coaxial cable assemblies - Sectional specification for semi-rigid coaxial cable assemblies

BS EN 61034-2-2005

Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

BS EN 61076-3-103-2004

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)

BS EN 61076-4-103-1999

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards

BS EN 61076-4-108-2003

Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1

BS EN 61076-4-110-2002

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function

BS EN 61076-7-001-2004

Connectors for electronic equipment - Cable outlet accessories - Blank detail specification

BS EN 61138-1998

Cables for portable earthing and short-circuiting equipment

BS EN 61169-24-2002

Radio-frequency connectors - Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)

BS EN 61196-2-2003

Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation

BS EN 61196-3-1999

Radio-frequency cables - Specifications - Sectional specification for coaxial cables for local area networks

BS EN 61196-3-2-1998

Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s

BS EN 61196-3-3-1998

Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s

BS EN 61196-4-2004

Coaxial communication cables - Sectional specification for radiating cables

BS EN 61238-1-2003

Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Test methods and requirements

BS EN 61242-1998

Electrical accessories - Cable reels for household and similar purposes

BS EN 61280-1-1-1998

Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable

BS EN 61280-4-2-2000

Fibre optic communication subsystem basic test procedures - Fibre optic cable plant - Single-mode fibre optic cable plant attenuation

BS EN 61300-2-35-1997

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable nutation

BS EN 61300-2-37-1997

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for closures

BS EN 61300-2-4-1997

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention

BS EN 61313-1-1997

Fibre optic passive components and cable assemblies - Capability approval - Generic specification

BS EN 61316-2000

Industrial cable reels

BS EN 61386-1-2004

Conduit systems for cable management - General requirements

BS EN 61386-21-2004

Conduit systems for cable management - Particular requirements - Rigid conduit systems

BS EN 61386-22-2004

Conduit systems for cable management - Particular requirements - Pliable conduit systems

BS EN 61386-23-2004

Conduit systems for cable management - Particular requirements - Flexible conduit systems

BS EN 61442-2005

Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)

BS EN 61515-1996

Mineral insulated thermocouple cables and thermocouples

BS EN 61537-2002

Cable tray systems and cable ladder systems for cable management

BS EN 61726-2000

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method

BS EN 61935-1-2005

Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 1: Installed cabling

BS EN 61935-2-2005

Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 2: Patch cords and work area cords

BS EN 62012-1-2002

Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Generic specification

BS EN 62037-2000

RF connectors, connector cable assemblies and cables - Intermodulation level measurement

BS EN 62153-1-1-2004

Metallic communication cables test methods - Electrical - Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation(IDFT)

BS EN 62153-4-2-2004

Metallic communication cable test methods - Electromagnetic compatibility - Screening and coupling attenuation - Injection clamp method

BS EN ISO 10807-1997

Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere

BS EN ISO 5828-2001

Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics

BS EN ISO 6551-1983

Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data

BS EN ISO 8205-1-2002

Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for double-conductor connection cables

BS EN ISO 8205-2-2002

Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for single-conductor connection cables

BS EN ISO 8205-3-1997

Water-cooled secondary connection cables for resistance welding - Test requirements

BS G 177-1961

Specification for Nyvin type electrical cables for aircraft

BS G 184 to G 188-1964

Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables

BS G 189-1964

Specification for Tersil type electrical cables for aircraft

BS G 192-1965

Specification for Efglas type electric cables with copper conductors for aircraft

BS G 195-1966

Specification for Minyvin type electric cables for aircraft

BS G 198-5-1997

Sleeves for aircraft electric cables and equipment wires - Specification for heat shrinkable moulded shapes

BS G 212-1971

Specification for general requirements for aircraft electrical cables

BS G 222-1976

Specification for Efglas type electric cables (metric units)

BS G 227-1979

Specification for Tersil type electric cables (metric units)

BS G 235-1987

Specification for electric cables for general airframe or equipment interconnect use (150 °C), wrapped insulation with silver plated conductors

BS G 236-1987

Specification for electric cables for general airframe or equipment interconnect use (200 °C), wrapped insulation with nickel plated conductors

BS G 237-1987

Specification for electric cables for general airframe or equipment interconnect use (200 °C), extruded insulation with nickel plated conductors

BS G 241-1988

Specification for fire proof electric cables for engine fire zone and airframe use

BS G 243-1990

Specification for igniter cables for engine use (4 kV d.c.)

BS G 246-1991

Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses

BS G 250-1994

Specification for identification marking of electric cables

BS G 258-1995

Glossary of terms for electrical cables and cable harnesses

BS IEC 60287-1-3-2003

Electric cables - Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses

BS IEC 60313-2002

Coaxial connectors used in nuclear laboratory instrumentation

BS IEC 60853-3-2002

Calculation of the cyclic and emergency current rating of cables - Cyclic rating factor for cables of all voltages, with partial drying of the soil

BS IEC 60874-14-1-1998

Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b

BS IEC 61000-5-2-1998

Electromagnetic compatibility (EMC) - Installation and mitigation guidelines - Earthing and cabling

BS ISO 13990-3-2006

Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Dimensions for connecting and interconnection cables

BS ISO 3808-2003

Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements

BS ISO 4141-1-2006

Road vehicles - Multi-core connecting cables - Test methods and requirements for basic performance sheathed cables

BS ISO 6856-2005

Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements

BS ISO/IEC 11458-1994

Information technology. Microprocessor systems. VICbus. Inter-crate cable bus

BS ISO/IEC 14709-1-1997

Information technology - Configuration of customer premises cabling (CPC) for applications - ISDN basic access

BS QC 221300-1997

Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB)

DD ENV 13149-2-2000

Public transport. Road vehicle scheduling and control systems. WORLDFIP cabling specifications

DD IEC PAS 62255-1-2001

Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor Cables

FD Z 86-154-1997

DIGITAL VIDEO BROADCASTING (DVB). IMPLEMENTATION GUIDELINES FOR THE USE OF MPEG-2 SYSTEMS. VIDEO AND AUDIO IN SATELLITE AND CABLE BROADCASTING APPLICATIONS.

KIT 79-2001

Information technology - Cabling systems pack

PD 6580-2-1995

Home and building electronic systems.Technical report 1. Guidelines for the professional installation of Twisted Pair cables class 1